Owner's Manual

Hardware
NXT Go Owner’s Manual, LBL-00145, MAN2030 101
6.7.1.1 PIM NXT for T-DOC
The PIM NXT has four transducer channels for use with T-DOC NXT catheters and two EMG
input ports to connect to EMG accessories such as patches, fine wires, and needles.
The PIM NXT houses SmartSense tag readers in each transducer channel to scan catheters
upon insertion of the catheter connector into each channel. Refer to the Consumable
Traceability section on page 62 for more information on scanning catheters into Synergy
software.
Figure 81 below displays an interlocked Roam NXT and PIM NXT and indicates key parts and
controls.
Figure 81: Roam NXT and PIM NXT Controls - Front and Back
6.7.1.2 PIM NXT for Fluid
The PIM NXT for Fluid has four Pressure Channel Connectors for use with the PIM NXT for
Fluid to Medex Transducer Cables and NXT fluid catheters. The PIM NXT for Fluis provides
two EMG input ports to connect EMG accessories such as patches, fine wires, and needles.
Figure 82 below displays the Roam NXT, PIM NXT for Fluid, Transducer Cables, Pressure
Transducers, and Disposable Cartridges interlocked and indicates key parts and controls.
Transducer
Channels
Roam NXT
LED Status
Battery LED
Status
Transducer
Doors
Interlocked Roam NXT and
PIM NXT - Front View
Clip
Charging Port
Reset Button
PIM NXT
Atmospheric
Reference Port
Interlocked Roam NXT and
PIM NXT – Rear with Clips
view
PIM NXT - Rear View
without Clips
EMG Port
Status DRAFT Effective