Owner's Manual

Hardware
NXT Go Owner’s Manual, LBL-00145, MAN2030 104
Pair the device by using the USB cable adapter and the pogo pin cable to connect the device
to the laptop PC. Once the device displays in the Synergy Device Manager, disconnect the
cable from the laptop and the laptop PC.
Table 12 indicates the different statuses for the Roam NXT and its battery. LABORIE
recommends for the user to have the device plugged in, or for the device to have at least 1-
2 hours of battery charge before beginning a test. Always connect the Roam NXT device to
the wall charger at the completion of working hours to ensure full charge for the next study
period.
Table 12: Roam NXT LED Signals
Roam NXT Charging Guidance:
The device battery shall charge from “very-low” to “charged” in less than 5 hours when in
charge only mode or within 8 hours if charging while acquiring data. “Charged” is battery
capacity sufficient for more than or equal to two hours of recording and “very-low” is
battery capacity sufficient for at least one-half hour of recording.
Battery Status
Roam NXT Status
Roam NXT
Flashing Green: Charging, not at
full capacity
(When removed from the charger
the indicator will change to amber
if charge is insufficient)
Green: Ready to use (for at least 2
hours of recording)
Solid Green: Charged (Battery
charging complete; plugged in and
at full capacity)
Solid Amber: Low (Battery capacity
sufficient for at least 1 hour of
recording)
Amber: Not ready to use.
Connect the Roam NXT to the wall
charger.
Flashing Amber: Very Low (Battery
capacity sufficient for at least 1/2
an hour of recording)
Lack of Illumination: Empty/Sleep
mode (No declared battery
capacity)
Lack of Illumination: Device inactive
or in sleep mode; not ready to use.
Device will go into sleep mode 1
hour after system shutdown. Return
the Roam NXT to the charger or use
the USB cable to pair to the PC.
Status DRAFT Effective