Owner's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Start
- 2.1 Setting Up the Equipment
- 2.2 Gathering Supplies and Equipment
- 2.3 Preparing the Urocap NXT
- 2.4 Preparing the NXT Go Pump Hub
- 2.5 Preparing the Roam NXT
- 2.6 Preparing the UPP Puller NXT (Optional)
- 2.7 Setting Up Consumables and Preparing the Patient
- 3 How to Perform a Study
- 4 Synergy Software
- 5 Maintenance and Service
- 5.1 Cleaning and Disinfection
- 5.2 Preventive Maintenance
- 5.3 Verifying Calibration
- 5.4 Configuration
- 5.5 Computer Virus Protection
- 5.6 Disposing of Product After Use
- 5.7 Environmental Consideration of Waste Disposal
- 5.8 Backups
- 5.9 Troubleshooting Guide
- 6 Hardware
- 7 Appendix
Appendix
NXT Go Owner’s Manual, LBL-00145, MAN2030 112
Roam NXT
P/N: ROX2001
Dimensions: 154mmx65mmx38mm
Weight: 229 g
Power Supply: 5VDC, 1.5A max
IP Rating Compliance: IP47
Type BF Applied Part: EMG/CMG, Pressure transducers
External Materials: Cycoloy C6200-111, Makrolon, Dow
Corning, Elastosil 3003/70 A/B, Gold-plated brass, Lexan 8010
Film, Loctite.
PIM NXT for T-DOC
P/N: PIX2211
Dimensions: 76mmx72mmx26mm
Weight: 90g
Pressure Range: -70 to +400 cmH20; EMG Range: ±1mV
Output Channels: 4 Pressure /2 EMG
Bandwidth: Pressure= 20Hz; EMG=0.5Hz to 1kHz
IP Rating Compliance: IP47
Type BF Applied Part: EMG/CMG, Pressure Transducers
External Materials: Cycoloy C6200-111, Elastosil 3003/70 A/B,
Gold-plated brass, Hardened Steel, Lexan 8010 Film
PIM NXT for Fluid
P/N: PIX2231
Dimensions: 86mmx70mmx26mm
Weight: 75g
Pressure Range: -40 to +400cmH2O; EMG Range: ±1mV
Output Channels: 4 Pressure / 2 EMG
Bandwidth: Pressure = 25Hz; EMG = 0.5Hz to 1kHz
IP Rating Compliance: IP47
Type BF Applied Part: EMG/CMG, Pressure Transducers
External Materials: Cycoloy C6200-111, Gold-plated brass,
Lexan 8010 Film
Urocap NXT
P/N: UCX2001
Dimensions: 150mmx150mmx80mm
Weight: 700g
Flow Range: 0 to 50mL/s; Volume Range: 0-2L
Output Channels: 1 Weight
Measured Weight Range: 0 to 2000g
Bandwidth: Flow=1Hz max.; Volume=5Hz.
IP Rating Compliance: IP47
External Power Supply: 5VDC, 1,5A max
Internal Power Supply: Li-Polymer Battery, 3.7V, 2400mAh
Status DRAFT Effective