Owner's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Start
- 2.1 Setting Up the Equipment
- 2.2 Gathering Supplies and Equipment
- 2.3 Preparing the Urocap NXT
- 2.4 Preparing the NXT Go Pump Hub
- 2.5 Preparing the Roam NXT
- 2.6 Preparing the UPP Puller NXT (Optional)
- 2.7 Setting Up Consumables and Preparing the Patient
- 3 How to Perform a Study
- 4 Synergy Software
- 5 Maintenance and Service
- 5.1 Cleaning and Disinfection
- 5.2 Preventive Maintenance
- 5.3 Verifying Calibration
- 5.4 Configuration
- 5.5 Computer Virus Protection
- 5.6 Disposing of Product After Use
- 5.7 Environmental Consideration of Waste Disposal
- 5.8 Backups
- 5.9 Troubleshooting Guide
- 6 Hardware
- 7 Appendix
![](/manual/laborie-medical-technologies/tdoc3/owner-s-manual-english/images/img-46.png)
Synergy Software
NXT Go Owner’s Manual, LBL-00145, MAN2030 45
4.1.2.2 Managing User Role
All Synergy account types have pre-set permissions that control which function users may
access based on user roles. Local and Domain Admins may manage user role permissions
with the Manage User Role window. Follow the instructions provided below for managing
user roles.
Click the Admin icon located on the Synergy title bar and select Mange User
Role (Figure 30).
Figure 30: Accessing the Manage User Role Application
The Manage User Role window will pop-up (Figure 31). To create a new role,
press Add.
Figure 31: Manage User Role Window
Create a new role by entering a new title in the Role category and selecting an
Authentication Type from the dropdown menu (Figure 32). Select all the
functions desired for access by the new user role, and press Save.
Status DRAFT Effective