Owner's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Start
- 2.1 Setting Up the Equipment
- 2.2 Gathering Supplies and Equipment
- 2.3 Preparing the Urocap NXT
- 2.4 Preparing the NXT Go Pump Hub
- 2.5 Preparing the Roam NXT
- 2.6 Preparing the UPP Puller NXT (Optional)
- 2.7 Setting Up Consumables and Preparing the Patient
- 3 How to Perform a Study
- 4 Synergy Software
- 5 Maintenance and Service
- 5.1 Cleaning and Disinfection
- 5.2 Preventive Maintenance
- 5.3 Verifying Calibration
- 5.4 Configuration
- 5.5 Computer Virus Protection
- 5.6 Disposing of Product After Use
- 5.7 Environmental Consideration of Waste Disposal
- 5.8 Backups
- 5.9 Troubleshooting Guide
- 6 Hardware
- 7 Appendix
Synergy Software
NXT Go Owner’s Manual, LBL-00145, MAN2030 50
4.3.1.3 Searching for a Required Patient
The Patients section will not show patient information until a search is initiated. Use the
Search List search box located in the Patients section to
search for a required patient. Enter an asterix “*” to view all patients, a plus sign “+” to
view the last entered patient, or an element of the patient’s name to view a specific patient.
All fields provided in the Patients section are searchable.
4.3.1.4 Exporting Patient Data
Patient data can be exported from the system in different forms (e.g. PDF, HTML, RTF,
DOCX, XLS, XLSX, Image) to a computer. Follow the instruction provided below to export
patient data.
Select the patient from the Patents section.
Open the report from Patient Details.
Click the export icon, the Export Document window will be generated.
NOTE: The export drop-down icon can be used to select the required format to
export the report. The Export Document window will be generated (Figure 36).
Figure 36: Export Document Window
Select the required format, file path, and other required options. Click the OK
button.
4.3.1.5 Reassigning Study
The reassign function allows the user to transfer study results from one patient to another if
the wrong patient was selected. Exercise caution when using this functionality.
Select the patient in the Patients section. Select the study to reassign under the
Studies tab in Patient Details section. Right-click on the study and select the
Reassign Study option.
Select the appropriate patient to reassign the study within the Patients section.
Right-click and select Reassign Study to <Patient Name> option. A User
Notification window will pop-up.
Click the Ok button to confirm the reassignment of the test.
To cancel reassignment, right click on the patient and select the Cancel option.
NOTE: If the study being re-assigned was previously sent to Electrical Medical Records,
contact the EMR vendor and request the deletion of the previously sent report. Synergy will
provide a warning message requesting confirmation of action when re-assigning a study
previously sent to EMR.
Status DRAFT Effective