Owner's Manual

Synergy Software
NXT Go Owner’s Manual, LBL-00145, MAN2030 66
Select the patient from the Patients Section in the Main Window, refer to Figure
34 for a visual reference. Open the report from the Patient Details section. The
report will automatically generate in conformance to the UDS report configuration.
Press the copy button located beside the Configuration title (Figure 54). If
desired, change the title of the new report configuration under the Name
category.
NOTE: New report configurations will be saved by Synergy once applied and may be
selected from the Configuration dropdown bar for future formatting.
Figure 54: Configuration Settings – Editing the Report
To adapt the report content, enable or disable various data fields by clicking the
checkbox next to the required data field in the Configuration Settings.
The position of some data fields in the report may be moved using the Up and
Down buttons. To move a data field, select the applicable field.
The arrow marks will appear beside the selection. Click the appropriate
arrow mark to move the data field, depending upon the desired direction.
Click the Preview button to view any changes that were implemented. To
complete updates to the report, press the Apply Changes button. To exit the
Report workflow step, press the Finish button.
4.5.4.2 Adding Comments
This option allows the addition of comments as a section in the report. To add comments to
the report, follow the steps provided:
Select the Add Report Comments button located in the toolbar. This will
launch the Comments window (Figure 55).
Figure 55: Comments Window
Status DRAFT Effective