User's Manual

Xwave Thunder 3D
6/01/99
16
6 Windows® NT® Installation
6.1 Installing Device Drivers under NT4.0
This section describes the necessary procedures for installing the Thunder 3D™ device
driver under NT4.0. Please follow the steps described below to properly install the driver.
Note: you must have the appropriate privileges in order to install the drivers.
1. Boot the system to the Windows NT desktop.
2. Click START, select RUN, In the Run dialog box browse to the NT folder NT40 on
the driver CD and then click Setup.exe and click OK.
3. Wait a couple of minutes while the data transfers.When the “Welcome” dialog box
appears, click Next> to continue.
4. The Setup program will copy the necessary files to the system, click Yes to restart
the computer and take effect the Thunder 3D™ driver.
7 Uninstalling Thunder 3D™