User's Manual

W9922PF PC DVD Playback Card
Page - 7
2.3.2. TV Connections
There are two methods of connecting your PC DVD Playback Card to a television set:
S-Video by using a standard S-Video cable, or
Composite Video by using a standard Composite Video cable.
A ) S-VIDEO Output Connector J2
The S-Video Output connector on the PC DVD Playback Card is a 4-pin female
S-Video connector, which can be connected directly to a TV using a standard S-Video
cable. The S-Video Out connector provides better picture quality.
Figure - 3
Installation:
Step 1. Plug the S-VIDEO Output Cable into the 4-pin female S-VIDEO Output port
J2 on the PC DVD Playback Card and the other side into the S-VIDEO Input
port of your TV set.
Please refer to Figure 3 for the location of this external connector.
NOTE: Due to the copyright protection circuit in use by this product, please do not
connect any recording device, such as a VCR, to the S-Video Out connector
J2 of the PC DVD Playback Card. For best playback, make sure the DVD
title is played directly from the PC DVD Playback Card onto a TV, not
through a VCR.