User Manual

ESS Audio/Modem Combo Card
Page - 5
Step 6. Plug the telephone line of the LINE Jack J1 into the Wall Jack on the
back of your telephone.
Step 7. Plug your microphone cable directly into the MICROPHONE IN Jack J2
of your Combo card.
Step 8. Plug your CD-In cable directly into the internal CD-In Connector J3 of
your Combo card.
Step 9. Plug your LINE-In cable into the external Phone Jack J4 of your Combo
card.
Step 10. Plug the cable of your Speaker system into J5 of your Combo card.
Step 11. Plug the SPDIF cable into the internal SPDIF connector JP1 of your
Combo card.
Step 12. Put back the system cover, reconnect the system power cord and all
peripheral devices. Check and make sure all connections are correct
before you turn on the system.
3. SOFTWARE INSTALLATION
3.1. Software Contents
There is one Installation CD-title that comes with this package. This CD includes the
device driver and application software that you may use under your Microsoftâ
Windowsâ 95 operating system.
3.2. Before Installing the Combo Card for the First Time
Unimodem/V Installation
For proper TAPI function, UNIMODEM/V must be installed on the system prior to the
modem installation. It is not necessary to check the existence of Unimodem/V in your
system before you plug in the modem card because the provided driver will auto-
install the subsystem.
Note: UNIMODEM/V is the new UNIMODEM subsystem provided by Microsoft
for Windowsâ 95. These binaries are not included with the Windowsâ 95
release and may change without prior notice.