User manual

25
3. Turn the UV-C lamps in direction of arrow as
shown in Fig. 17 (
1) until you hear a clicking
sound. Remove UV-C lamps in direction of
arrow (
2). Dispose of the UV-C lamps (see 7,
page
30)
Abb. 17
6.5.3 Installing new UV-C Lamps
Notice. Avoid direct skin contact with UV-C lamps. Wear cotton gloves.
Fingerprint grease may shorten life cycle of UV-C lamps.
1. Install new UV-C lamps as indicated in Fig. 18
(
1). Turn UV-C lamps in direction of arrow (2)
until you hear a clicking sound. Notice:
Li.LAC will only operate if both UV-C lamps
are installed.
Fig. 18
2. Re-attach UV-C lamp protection panel and
re-fit the screws (Fig. 19).
Fig. 19
Notice.
Use only UV
-
C la
mps from the same manufacturer. Use either Osram
or Philips.