Operation Manual
INSTALLER’S MANUAL
D
To remove top :
1- Remove the pan supports and burners.
2- Unscrew the screw(s) on burners , see B and B1 fig.【3】and【4】.
3- Pull and raise the top after having loosened the 2 screws C (fig.【5】&【6】).
4- Wedge the cooking surface.
B
【3】
B1
【4】
B1
【5】
C
【6】
Retting the cooking surface
When refitting the cooking surface, it is vital to tighten fastening screws. Failure to do so can cause
distortion of the cooking surface.
It may be necessary to open the hob under the following circumstances :
- Making adjustments when changing gas type.
- Adjusting thermocouples.
- Resetting the safety thermostat with vitro-ceramic hob.
OPENING AND REFITTING THE HOB
Ft 145a - GB - Rév 02 - Modifié le : 08/09/08 16/48
SAULIEU
SAVIGNY
: