Placid’ Wide Spray Mist Ultrasonic Humidifier wi LCDJSQ-2103 i User Manual oy Thanks for your purchase. We provide a one-year warranty. If any quality issues, replacement or refund is available.
Precautions Thank you for purchasing our humidifier LCDJSQ-2103. Please read this manual carefully before using and keep it for future reference. All pictures shown are for illustration purposes only. Actual products may vary due to product enhancement.
Contents Safety Guide mr 1-2 Components -Placement o-u ooo ooo ooo 4 Installation oo 5 Water Filling & Mist Tube Use -coco 6 Control Panel & Remote Control moo moo ooo 7 Maintenance Lo 9-10 Product Specifications ooo 1 Warranty moose emo 12
Safety Guide & Please do not disassemble or transform the machine. # Please do not let the machine be strongly Impacted. @ Please keep a distance when the humidifier spraying mist, especially for people with sensitive respiratory tract. @ Please stop the machine before moving it. # Please do not connect the socket that exceeds the rated voltage and do not use the extension cable to avoid fire or electric shock. & When the plug or wire is abnormally hot, please stop using it.
Safety Guide # Please do not put essential oil into the main body or water tank, which may cause water leakage deformation or failure. @ Please do not Insert your fingers or other things Into the water Inlet or alr outlet or the gap which may cause damage te the machine or electric shack. # When not in use for a long time {more than 24 hours), please pour out the water from water tank and main body to prevent mold or impurities from harming your health.
Components Mist Outlet Main Body UV Light Water Outlet Fan Float Power Cord 3 Main Body —» Handle mp Water Pipe ¥ Water View port .
Placement Please place the humidifier in a horizontal position more than 50 cm away from walls, furniture, household appliances, etc. Please do not use it on the following occasions so as to avoid water leakage, signal jamming damage or injury, etc. Direct sunlight. §On the unstable platform. With high temperatures humidity and dust. Near the alr conditioner, heater and stove. ## Near mobile phones, computers and other precision instruments. Ei Near the radio and other objects that emit radio waves.
Installation 2 Remove the insulating plastic sheet before using the remote control. 1.Take off the main body, take out the remote control and other accessories in the water tank. 3.Remove the protective bag from the 4 Place the main body on the water tank water pump. properly.
Water Filling & Mist Tube Use & Distilled water or RO water is recommended. # Please add water below 40°C. i Please do not exceed the max water line. Please do not to let the water into the mist outlet otherwise the water may enter the interior, causing machine failure. £ Please do not add mineral water, plasma water or tap water that has been left for a long time. If mold or impurities breed, it may cause health «Add water from the water tank problems. » Add water without opening the cover.
Control Panel & Remote Control Remote control (h Touch the power button, the display lights up and the POWER humidifier starts to work. The humidity setting range Is 40-90, and each touch (1) increases by 5%. The humidifier wil automatically stop Humility S Praying mist when the surrounding humidity reaches the set value ©] Touch the sleep button to enter the sleep mode, and the oo display will be dimmed. Touch any button to exit sleep SLEEP mode, and the display will light up.
Maintenance Tilt the main body to the tilde and pour out the water. Clean the water tank with the sponge weekly. Clean the water sink with the sponge weekly. &When not in use for a long time {more than 24 hours), please pour out the water in the water tank and sink to prevent mold or impurities from harming your health. # Be sure to pull out the power plug before maintaining the humidifier.
FAQ : After the power is turned on, the display does not light up. : There may be water entering the circuit board. Please air-dry the main body for one day. If it still can't be muted on, please contact customer service by email. > 0 : Low mist output. : When the lambent humidity exceeds the set value, the machine will stop spraying mist automatically. But if the atomizer is damaged, please contact customer service by email. > 0 : Water shortage with beeping.
FAQ Q: There is white powder around the humidifier and scale in the main body or tank. A: Distilled water or RO water is recommended. Minerals and organics may adhere to the water when using tap water, which may cause the function of humidifier to decline or malfunction. If the dirt is not easy to clean, the cloth can be soaked in neutral detergent before wiping.
Product Specifications Product Name = Ultrasonic Humidifier Model Number | LCDJSQ-2103 Operation Mode | Low Medium High Max Mist Output | 2000mLth Rated Power 110W Rated Voltage | 100-240V Rated Frequency | 50/60Hz Size 250 x 250 x 700mm 250 x 250 x 1100mm(with mist tube) Tank Capacity | aw. 5.
Warranty Policy Warranty Period 1 Our company provides a one-year warranty, which starts from the date of purchase. # When resuming the product, please confirm that the product is intact, and the packing boxes and accessories are complete. Non-Warranty Policy The following conditions are not covered by the warranty. # Over the warranty period. iA Damage caused by natural disasters and other force manure.
