User manual

LaCie Hard Disk • DESIGN BY NEIL POULTON
User Manual
Getting Connected
Page 9
2.1. Turning the Drive On
ImpOrTANT INfO: Please connect the power supply before connecting the USB cable to ensure that the vol-
ume mounts correctly on your computer.
e power supply kit is composed of two cables: one
cable (A) connects to the LaCie drive; and the other
cable (B) connects to a power outlet, such as a wall out-
let or a surge protector.
Connect Cable A to your LaCie Hard Disk.
Connect Cable B to the power supply brick (C).
Connect Cable B to a surge protector or wall outlet.
Turn on the drive by moving the power switch on the
back of the drive to the ON position.
1.
2.
3.
4.
CAUTION: Only use the AC adapter supplied with your specific LaCie Hard Disk. Do not use a power supply
from another LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage
to the device and void your warranty.
Always remove the AC adapter before transporting your LaCie Hard Disk. Failure to remove the adapter may result
in damage to your drive and will void your warranty.
TeChNICAl NOTe: You may use your LaCie Hard Disk when in a foreign country thanks to its 100-240 Volt
power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts
no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter
other than one authorized by LaCie will void your warranty.
C
A
Figure. 2.1
B