User manual

LaCie LaCinema Rugged Troubleshooting
User Manual page 36
There is no picture
being displayed.
Are all of the cables connected
correctly?
Ensure that all of the cables are connected correctly. If you are using
the Composite A/V cable, make sure that the component cable is not
plugged in at the same time. See section 4. Connecting The LaCie
LaCinema Rugged to Your TV and Stereo.
The picture is in
black and white or
there is no picture
being displayed.
Is the LaCie LaCinema Rugged’s
Video setting correctly set?
In the event that there is an error with the Video setting, press the
i but-
ton on the remote control until the correct image is displayed. After the
picture is being displayed, go into the Settings menu and select Video
Settings. From there, you can select the correct settings. For more
information, please see section 4.2.1. Functions of the Basic Buttons.
Optimizing video
connections.
What connectivity method will
produce the best quality?
For optimal quality and performance, the best video connection is
the HDMI cable (included). For more information, please contact
your LaCie reseller or LaCie Customer Support.
There is no sound
when connecting
the LaCie LaCin-
ema Rugged to a
digital stereo.
Have the Audio Settings been
adjusted?
When using the A/V cable to connect the LaCie LaCinema Rugged to
a TV, go into the Settings menu and select Audio Settings. From this
menu, you will need to select the Analog option instead of Digital.
Viewing photos. Does it take several seconds to
load a picture?
Depending on file size, photos may take several seconds to load
properly. Reducing the photo’s resolution will reduce the file size, as
well, and allow the file to load faster.