User manual
LaCinema Black PLAY Setting Up the LaCinema Black PLAY
User Manual page 14
Setup consists of six steps:
✦ STEP 1: Connect to TV (section 3.1)
✦ STEP 2: Connect the Power Supply (section 3.2)
✦ STEP 3: Turning on the TV (section 3.3)
✦ STEP 4: Complete the Installation Wizard (section 3.4)
✦ STEP 5: Connect to Your Network (section 3.5)
3.1. STEP 1: Connect to TV
The LaCinema Black PLAY supports different ways of connecting
to televisions. From the following methods, choose the setup that
matches the ports on your television or receiver:
✦ HDMI (high definition) (section 3.1.1)
✦ Component (high definition) (section 3.1.2)
✦ Composite (standard definition) (section 3.1.3)
In each of the above connection methods, it is possible to connect
the LaCinema Black PLAY to home theater systems by plugging
the S/PDIF cable (not included) to your digital amplifier via the
digital optical audio connector (see section 3.1.2. Component
& Analog Stereo Audio (High Definition) Connection for details.
The chart at right illustrates the qualities made possible by the
different connection methods.
TECHNICAL NOTE: The connectors on the rear of your TV may
not appear exactly the same as shown below. Please read the la-
bels next to the connectors carefully to ensure correct connections.
continued on the next page >>
3. Setting Up the LaCinema Black PLAY
Definition Connection
Max. Display
Resolution
High
Definition
HDMI 1080i
Component 1080i
Standard
Definition
Composite 576p