User manual

LaCinema Black PLAY Setting Up the LaCinema Black PLAY

User Manual page 25

3.5. STEP 5: Connect to Your Network

The LaCinema Black PLAY helps you select and conﬁgure your home

network connection. Choose to connect with an Ethernet or wireless

network and follow the steps below depending on your choice.

3.5.1. Wireless Network Connection

The LaCinema Black PLAY has a built-in WiFi antenna. When con-

necting to your network via wireless, the LaCinema Black PLAY helps

you select, connect with, and conﬁgure your network connection.

Use the remote control to:

1. Go to Home menu and enter the Settings Space by pressing

the Options/Settings

button (Fig. 22).

2. Select the Network menu, press the Down button and se-

lect Conﬁgure Network.

3. Select Wireless Connection Mode.

4. Select your wireless network from the list.

5. Enter the password if required.

6. Select the connection method, Automatic or Manual.

✦ In automatic, network parameters will be deﬁned auto-

matically.

✦ If you choose manual, you will asked to enter the LaCin-

ema Black PLAY’s IP address.

TECHNICAL NOTE: If network is not managed by DHCP, you

may have to enter your IP address, subnet mask, router, and DNS

addresses.

7. Once done, you will go to redirected to the Settings Space menu.

8. You can check the network by selecting Connection in the

Network menu.

For details on how to transfer ﬁles from your computer to your

LaCinema Black PLAY, see section 5.2.2. Host Computer.

Fig. 22

NOTE: Have your network password (if you use one) and your

LaCinema Black PLAY remote control handy.

IMPORTANT NOTE: Wired (Ethernet) and Wireless (WiFi) con-

nections cannot be active at the same time.