User manual

LaCinema Classic Bridge Setting Up the LaCinema Classic Bridge

User Manual page 16

3.2. Step 2: Transfer Files to the

Hard Drive

1. Make sure that you have either connected an external USB

hard drive or installed an internal hard drive as outlined in

section 3.1. Step 1: Installing a Hard Drive.

2. Connect the power supply which powers on the LaCinema

Classic Bridge.

3. Connect the USB cable form the LaCinema Classic Bridge to

your computer.

✦ See Fig. 13 if you installed an internal hard drive.

✦ See Fig. 14 if you connected an external USB hard drive.

4. Access the drive in My Computer (Windows users) or from the

Desktop (Mac users). Create folders on the mounted volume

in which to place your media (MOVIES, MUSIC, PICTURES,

and UPDATE) (see Fig. 15). The names must be exact.

IMPORTANT INFO: You must correctly categorize your ﬁles

(i.e., music in the Music folder) or they will not be properly clas-

siﬁed on your TV.

TECHNICAL NOTE: Windows users only: If you use the For-

matter Utility (located on the CD-ROM) to reformat your ex-

ternal hard drive to FAT32, it will create the folders for you.

5. Copy your multimedia ﬁles by adding your music, photos,

and videos by simply dragging and dropping to the appropri-

ate folders.

6. Unmount the volume and disconnect the USB cable from

your computer.

TECHNICAL NOTE: It is also possible to transfer ﬁles to an exter-

nal hard drive before connecting it to the LaCinema Classic Bridge

(see Fig. 16).

Fig. 13

Fig. 14

Fig. 15

Fig. 16