User manual

LaCinema Mini HD Sharing Files Throughout Your Home Network
User Manual page 48
8.1.1. STEP 1: Connect the Power Supply
1. Plug one end of the power adapter cord into the back of LaCin-
ema Mini HD and the other end into a power outlet (Fig. 86).
The LaCinema Mini HD may take a few seconds to boot.
Move on to the next step, 8.1.2. STEP 2: Connect the Ethernet Cable.
CAUTION: Only use the AC adapter supplied with your specific
LaCie device. Do not use a power supply from another LaCie device
or another manufacturer. Using any other power cable or power
supply may cause damage to the device and void your warranty.
Always remove the AC adapter before transporting your LaCie drive.
Failure to remove the adapter may result in damage to your drive
and will void your warranty.
TECHNICAL NOTE: You may use your LaCie drive when in a for-
eign country thanks to its 100-240 Volt power supply. To be able to
use this feature, you may need to purchase an appropriate adapter
or cord.
Fig. 86