4big Quadra eSATA 3Gbits | FireWire 800 | FireWire 400 | Hi-Speed USB 2.
Box Content LaCie 4big Quadra with drives eSATA (3Gbits) cable FireWire 800 (9:9 pin) cable FireWire 400 (6:6 pin) cable Hi-Speed USB 2.0 cable Power supply kit LaCie Storage Utilities CD-ROMs (with detailed user manual and software) Protect your investment – register for free technical support: www.lacie.
designed by neil poulton 1 7 2 3 8 4 9 5 10 6 11 Front View Rear View 1. Shortcut button with activity LED 7. Drive status LED 2. D rive tray lock 8. USB 2.0 port 3. Drive tray handle 9. Power input jack 4. eSATA 3Gbits port 5. on/auto/off power switch 10. RAID mode selection 11. FireWire 800 ports 6.
Setup 1. Plug the power supply into an AC outlet and connect the power cable to the 4big Quadra. 2. Decide which interface cable you will use (eSATA 3Gbits , FireWire 400, FireWire 800, USB 2.0) and connect your 4big Quadra to your computer. NOTE : Do not connect more than one interface cable between your computer and your 4big Quadra. eSATA designed by neil poulton USB 2.
3. LaCie 4big Quadra comes with four 3.5” SATA II hard disks installed. The disks are formatted in HFS+, so Windows users will need to reformat the disks before using the 4big Quadra. Please see the detailed User Manual on the LaCie Storage Utilities CD-ROM for information on formatting hard disks. 4. The disks are configured in RAID 0. If you would like to change the RAID mode, see Changing the RAID Mode on the next page. 5.
Changing the RAID Mode CAUTION! - Changing the RAID mode will erase the data stored on the 4big quadra. Back up data before changing the RAID mode. - The 4 disk trays must be in place before the RAID mode can be modified. NOTE: See the User Manual for information on RAID modes. 1. Unmount or safely remove the 4big Quadra volumes from your computer, disconnect the interface cable and switch off the 4big. 2.
FR Installation 1. Branchez le bloc d'alimentation sur une prise secteur et le cordon d'alimentation sur le 4big Quadra. 2. Décidez quel câble d’interface utiliser (eSATA 3 Gbits, FireWire 400, FireWire 800 ou USB 2.0) et branchez votre 4big Quadra sur votre ordinateur. REMARQUE : ne branchez pas plus d’un câble d’interface entre votre ordinateur et votre 4big Quadra. 3. Le LaCie 4big Quadra est fourni avec quatre disques durs SATA II de 3,5” intégrés.
IT Installazione 1. Collegare l'alimentatore alla presa CA a muro, quindi collegare il cavo di alimentazione all'unità LaCie 4big Quadra. 2. Scegliere il cavo di interfaccia da utilizzare (eSATA 3Gbits , FireWire 400, FireWire 800, USB 2.0) e collegare l'unità LaCie 4big Quadra al computer. NOTA: non collegare contemporaneamente più cavi di interfaccia tra il computer e l'unità 4big Quadra. 3. L’unità LaCie 4big Quadra viene fornita con quattro unità disco SATA II da 3,5” installati.
DE Setup (Konfiguration) 1. Schließen Sie das Netzteil an eine Stromsteckdose an, und verbinden Sie das Stromkabel mit der 4big Quadra. 2. Entscheiden Sie sich für eines der Schnittstellenkabel (eSATA 3 GBit/s, FireWire 800, USB 2.0), und verbinden Sie die 4big Quadra mit dem Computer. HINWEIS: Schließen Sie nicht mehrere Schnittstellenkabel an Ihren Computer und die 4big Quadra an. 3. LaCie 4big Quadra ist mit vier 3,5-Zoll-SATA-II-Festplatten ausgestattet.
ES Instalación 1. Enchufe la fuente de alimentación a una toma de corriente y el cable de alimentación a la unidad 4big Quadra. 2. Determine qué cable de interfaz utilizará (eSATA 3Gbits , FireWire 400, FireWire 800, USB 2.0) y conecte la unidad 4big Quadra al ordenador. NOTA: No conecte más de un cable de interfaz entre el ordenador y la unidad 4big Quadra. 3. LaCie 4big Quadra tiene instalados cuatro discos duros SATA II de 3,5”.
NL Setup 1. Sluit de voeding aan op een stopcontact en verbind het netsnoer met de 4big Quadra. 2. Bepaal welke interfacekabel u wilt gebruiken (eSATA 3Gbits, FireWire 400, FireWire 800 of USB 2.0) en sluit de kabel aan op uw 4big Quadra en op de computer. OPMERKING: Sluit niet meer dan één enkele interfacekabel aan op uw computer en de 4big Quadra. 3. De LaCie 4big Quadra wordt geleverd met vier vaste 3,5" SATA II-schijven geïnstalleerd.
PT Instalação 1. Ligue o transformador a uma tomada CA e, em seguida, ligue o cabo de alimentação ao sistema 4big Quadra. 2. Decida qual o cabo de interface que utilizará (eSATA 3Gbits, FireWire 400, FireWire 800, USB 2.0) e ligue o sistema 4big Quadra ao seu computador. NOTA: Não ligue mais do que um cabo de interface ao seu computador e ao sistema 4big Quadra. 3. O LaCie 4big Quadra inclui quatro discos rígidos SATA II de 3,5 pol. instalados.
SV Installation 1. Anslut strömförsörjningskabeln till ett växelströmsuttag och till 4big Quadra. 2. Avgör vilken gränssnittskabel som ska användas (eSATA 3Gbits , FireWire 400, FireWire 800, USB 2.0) och anslut 4big Quadra till datorn. OBSERVERA! Anslut inte mer än en gränssnittskabel mellan datorn och 4big Quadra. 3. LaCie 4big Quadra levereras med fyra 3,5-tums SATA II-hårddiskar installerade. Hårddiskarna har formaterats i HFS+ så Windows-användare måste formatera om dem innan 4big Quadra kan användas.
DA Installation 1. Sæt strømforsyningens stik i en stikkontakt, og forbind strømkablet til 4big Quadra. 2. Bestem, hvilket interfacekabel du vil bruge (eSATA 3Gbits , FireWire 400, FireWire 800, USB 2.0), slut 4big Quadra til computeren. BEMÆRK: Forbind ikke mere end ét interfacekabel mellem computeren og 4big Quadra. 3. LaCie 4big Quadra sælges med fire 3.5" SATA II-harddiske installeret. Diskene er formateret i HFS+, så Windows-brugere skal omformatere dem, før 4bi Quadra tages i brug.
FI Asennus 1. Kytke virtalähde sähköpistorasiaan ja kytke virtajohto 4big Quadraan. 2. Valitse käytettävä liitäntäkaapeli (eSATA 3Gbits , FireWire 400, FireWire 800 tai USB 2.0) ja kytke 4big Quadra tietokoneeseen. HUOM. Kytke tietokoneen ja 4big Quadran välille vain yksi liitäntäkaapeli. 3. LaCie 4big Quadrassa on toimitettaessa asennettuna 3.5” SATA II -kiintolevyä. Levyt on alustettu HFS+-taltioiksi, joten ne on alustettava uudelleen ennen kuin 4big Quadraa voidaan käyttää Windowsin kanssa.
PL Konfiguracja 1. Podłącz zasilacz do gniazdka sieciowego i kabel zasilający do macierzy 4big Quadra. 2. Wybierz kabel interfejsu (eSATA 3 Gb/s, FireWire 400, FireWire 800, USB 2.0) i podłącz macierz 4big Quadra do komputera. UWAGA: Nie podłączaj więcej niż jednego kabla interfejsu do komputera i do macierzy 4big Quadra. 3. Macierz 4big Quadra jest dostarczana z czterema 3,5-calowymi dyskami twardymi SATA II.
RU Настройка 1. Подключите источник питания к розетке, а шнур питания — к устройству 4big Quadra. 2. Выберите кабель интерфейса (eSATA 3Gbits, FireWire 400, FireWire 800, USB 2.0)и подключите устройство 4big Quadra к компьютеру. ПРИМЕЧАНИЕ. Не используйте более одного кабеля интерфейса для подключения устройства 4big Quadra к компьютеру. 3. Устройство 4big Quadra поставляется с четырьмя установленными жесткими дисками SATA II формата 3,5 дюйма, отформатированными в файловой системе HFS+.
EL Εγκατάσταση 1. Συνδέστε το τροφοδοτικό σε μια παροχή τάσης δικτύου και συνδέστε το καλώδιο τροφοδοσίας στο 4big Quadra. 2. Αποφασίστε ποιο καλώδιο διασύνδεσης θα χρησιμοποιήσετε (eSATA 3Gbits , FireWire 400, FireWire 800, USB 2.0) και συνδέστε το 4big Quadra στον υπολογιστή. ΣΗΜΕΙΩΣΗ: Μην συνδέετε περισσότερα από ένα καλώδια διασύνδεσης μεταξύ του υπολογιστή και του 4big Quadra. 3. Το LaCie 4big Quadra παραδίδεται με τέσσερις εγκατεστημένους σκληρούς δίσκους 3,5” SATA II.
RAID変更モードにするには、4bigの前面のLEDボタンを押しながら電源をONにして(電源モードの 「AUTO」を選ばないでください)青と赤に点滅するまで約15秒押し続けてください。 正面の LED ボタンを押してモードを有効化します。4big が起動します。
要进入RAID 修改模式,调整4big至“开启”(不要选择“自动”) 以及同时按下前端显示灯15 秒。前端显示灯会持续闪烁蓝色和红色。 通过按正面的 LED 按钮来验证模式。4big 将启动。
KO RAID 수정모드로 들어가려면, 4big의 전원을 켜고(“Auto”를 선택하지 마십시오), 전면부 LED 버튼을 15초 동안 누루세요. 전면 LED가 파랑과 빨강으로 깜박거립니다. 전면의 LED에 의해 확인 버튼을 누르면 모드. 4big가 시작됩니다.
TR Kurulum 1. Güç kaynağını bir AC prizine, güç kablosunu da 4big Quadra'ya takın. 2. Hangi arabirim kablosunu kullanacağınıza karar verin (eSATA 3Gbits, FireWire 400, FireWire 800, USB 2.0) ve 4big Quadra'yı bilgisayarınıza bağlayın. NOT: Bilgisayarınızla 4big Quadra'nın arasına birden fazla arabirim kablosu bağlamayın. 3. LaCie 4big Quadra, dört adet 3.5” SATA II sabit disk yüklü olarak gelir.
Contact Us LaCie USA 22985 NW Evergreen Pkwy Hillsboro, OR 97124 sales@lacie.com LaCie France 17, rue Ampère 91349 Massy Cedex sales.fr@lacie.com LaCie Asia Limited 25/F Winsan Tower 98 Thomson Road Wanchai, Hong-Kong sales.asia@lacie.com LaCie Germany Am Kesselhaus 5 D-79576 Weil Am Rhein sales.de@lacie.com LaCie Spain C/ Núñez Morgado, 3, 5a pl. 28036 Madrid sales.es@lacie.com LaCie Srl Milano Business Park Edificio B1 Via dei Missaglia 97 20142 Milano sales.it@lacie.