Biggest Quadra 4-Disk RAID USB 2.
LaCie Biggest Quadra User Manual Table of Contents page Table of Contents Health and Safety Precautions General Use Precautions 1. Introduction to the LaCie Biggest Quadra 4 4 6 2. About the LaCie Biggest Quadra 2.1. Minimum System Requirements 2.2. Package Content 2.3. Specifications 2.4. Views of the Drive 2.4.1. Front View 2.4.2. Rear View 2.5. Cables and Connectors 2.5.1. FireWire 400 and 800 Cables and Connectors 2.5.2. Hi-Speed USB 2.0 Cables and Connectors 2.5.3. eSATA Cables and Connectors 2.
LaCie Biggest Quadra User Manual Table of Contents page 5. Using the LaCie Biggest Quadra 5.1. Disk Status and Activity Indicators 5.2. LCD Display Messages 5.2.1. Initialization Messages 5.2.2. Rebuild Messages 5.2.3. Failure and Error Messages 5.2.4. RAID and Disk Status Messages 5.2.5. RAID and Disk Information Messages 35 35 36 36 37 38 39 40 6. Maintaining Your LaCie Biggest Quadra 6.1. Removing/Replacing A Drive 6.2. Firmware Updates 42 42 42 7. Technical Information 7.1.
LaCie Biggest Quadra User Manual Copyrights Copyright © 2007 LaCie. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of LaCie. Trademarks Apple, Mac, Macintosh and FireWire are registered trademarks of Apple Computer, Inc.
LaCie Biggest Quadra User Manual This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a collection point for the recycling of electrical and electronic equip- Forward page ment.
LaCie Biggest Quadra User Manual Forward page ❖ Do not place heavy objects on top of the LaCie Biggest Quadra or use excessive force on it. ing use or storage. Dust can build up inside the device, increasing the risk of damage or malfunction. ❖ Never use excessive force on your LaCie Biggest Quadra. If you detect a problem, consult the Troubleshooting section in this manual. ❖ Never use benzene, paint thinners, detergent or other chemical products to clean the outside of the LaCie Biggest Quadra.
LaCie Biggest Quadra User Manual 1. Introduction to the LaCie Biggest Quadra Congratulations on the purchase of your new LaCie Biggest Quadra. This high-performance, extremely flexible RAID (Redundant Array of Independent/Inexpensive Disks) subsystem is ideally suited for integration with databases, imaging systems and e-mail and Web servers. RAID technology is one of the best means to protect your data, while providing greater performance, data integrity and availability than standard hard disk storage.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 2. About the LaCie Biggest Quadra 2.1. Minimum System Requirements Windows Users ❖ Pentium III or higher compatible processor ❖ 128MB RAM or greater ❖ Windows 2000, Windows Server 2003, Windows XP or Windows Vista ❖ Available eSATA*, USB 2.0, FireWire 400 or FireWire 800* interface port Mac Users ❖ ❖ ❖ ❖ G3 and later or Intel Core processor 128MB RAM or greater Mac OS 10.2.8 or later Available eSATA*, USB 2.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 2.2. Package Content Your LaCie hard drive package should contain the following: 1 SATA SATA 2 4 3 6 5 9 Biggest FW800 Biggest FW800 User Manual & Utilities version 1.0 ©2 006 L aCie , all rights reser ved. 7109 060 24 LaCie Biggest Quadra RAID with 4 SATA hard disks 2 eSATA cable 3 FireWire 800 9-to-9-pin cable 4 FireWire 800/400 9-to-6-pin cable 5 Hi-Speed USB 2.
LaCie Biggest Quadra User Manual 2.3. Specifications ■ Host Interface ❖ eSATA, FireWire 400, FireWire 800 and USB 2.0 ■ Weight and Dimensions ❖ 25.3 lbs/11.5 Kgw ❖ 152.8 x 206.4 x 268.5 mm ■ Operation Temperature ❖ 0 - 35°C ■ Operation Humidity ❖ 5 - 95%, non condensing ■ Storage Humidity ❖ 5 - 95%, non-condensing ■ Power Supply ❖ 200W; input 100~250V AC; output +5V/10A, +12V/10A, +3.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 10 2.4. Views of the Drive ■ 2.4.1. Front View 5 4 3 1 Disk Activity Indicator – Indicates when the disk is being accessed. For more information, please see section 5.1. Disk Status and Activity Indicators. 2 Disk Status Indicator – Indicates the status of the disk. For more information, please see section 5.1. Disk Status And Activity Indicators.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 11 ■ 2.4.2. Rear View 1 Ventilation Fan – The ventilation fan keeps your drive cool during operation. Be sure not to block the fan when using your drive. 2 Power Switch – The power svwitch is the main on/off switch for the LaCie Biggest Quadra. 3 Power Supply Connector – This is where you plug in the AC adapter supplied with the drive. For more information, please see section 4.2. Creating An Array.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 12 2.5. Cables and Connectors ■ 2.5.1. FireWire 400 and 800 Cables and Connectors FireWire 400, also known as IEEE 1394, is a highspeed serial input/output technology for connecting peripheral devices to a computer or to each other, and FireWire 800 is the implementation of the new IEEE 1394b standard. FireWire 800 offers increased bandwidth and extended distance between devices.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 13 ■ 2.5.2. Hi-Speed USB 2.0 Cables and Connectors USB is a serial input/output technology for connecting peripheral devices to a computer or to each other. Hi-Speed USB 2.0 is the latest implementation of this standard, and it provides the necessary bandwidth and data transfer rates to support high speed devices such as hard drives, CD/DVD drives and digital cameras. Please see section 9.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 14 ■ 2.5.3. eSATA Cables and Connectors Your LaCie Biggest Quadra uses the latest in SATA technology, allowing interface (or bus) transfer rates of up to 3 Gbits/s. SATA technology was originally developed to serve as an internal interface, delivering improved performance to internal connections. Soon after, eSATA, or external SATA was developed, allowing for the use of shielded cables outside the PC.
LaCie Biggest Quadra User Manual About the LaCie Biggest Quadra page 15 2.6. Drive Tray Locks The Biggest Quadra’s drive trays can be locked into place with the provided keys to prevent accidental drive tray removal and damage. LaCie recommends that you keep your drive trays locked while the Biggest Quadra is in use. To lock a drive tray: 1. Ensure that the drive tray is fully seated in its bay. 2. Insert the key into the lock. 3.
LaCie Biggest Quadra User Manual Understanding RAID page 16 3. Understanding RAID Your LaCie Biggest Quadra is shipped with a preconfigured RAID level of 5, but it supports four different RAID levels: 0, 0 + 1, 5 and 5 + Hot Spare. This section will help you decide which RAID level is right for you. 3.1. RAID 0 Striped Disk Array Without Fault Tolerance Also called striping, this level offers high transfer rates and is ideal for large blocks of data where speed is of the utmost importance.
LaCie Biggest Quadra User Manual Understanding RAID page 17 3.2. RAID 0 + 1 High Data Transfer Performance This level combines striping and mirroring, which provides full data redundancy and protects data in the event that multiple drives fail (provided that the data on one of each mirrored pair of drives is intact). Storage capacity in this configuration is determined by multiplying the capacity of the smallest disk by two.
LaCie Biggest Quadra User Manual Understanding RAID page 18 3.3. RAID 5 Independent Data Disks With Distributed Parity Blocks This is the most versatile RAID level and offers high I/O transaction rates, which greatly helps applications that perform large numbers of concurrent requests. If one drive in a RAID 5 array fails, the lost data can be rebuilt from data on the remaining, functional disks. Essentially, RAID level 5 is a striped set with parity, and requires at least three disks to implement.
LaCie Biggest Quadra User Manual Understanding RAID page 19 3.4. RAID 5 + Hot Spare This level is the same as RAID 5, but one disk is designated as a “Hot Spare,” which means that in the event of a disk failure, the “Hot Spare” disk would automatically be activated to replace the failed disk.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 20 4. Setting Up Your LaCie Biggest Quadra This chapter covers the installation and configuration of your LaCie Biggest Quadra. A relatively easy process, you will be guided through the five following steps: Step 1 4.1. Setting The RAID Level – The LaCie Biggest Quadra is pre-configured at RAID level 5, but you have the option of customizing your RAID level in this step. Page 21 Step 2 4.2.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 21 4.1. Setting the RAID Level The LaCie Biggest Quadra is pre-configured at RAID level 5, but it may be re-configured. The RAID level is set using the RAID Level Switch Selectors on the rear panel of the LaCie Biggest Quadra. The RAID level selectors consist of two switches, with four possible switch position combinations: RAID 0, 0 + 1, 5 and 5 + Hot Spare.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 22 ■ 4.1.1. RAID 5 This is the default setting of the LaCie Biggest Quadra. Follow these steps to set the RAID level at RAID 5. 1. Power off the LaCie Biggest Quadra. 2. Move switch 1 and 2 of the RAID Level Switch Selectors to the OFF position. CAUTION: In a RAID 5 array, in the event that a disk needs to be replaced, always replace the failed disk with the LaCie Biggest Quadra’s power on.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 23 ■ 4.1.3. RAID 0 1. Power off the LaCie Biggest Quadra. 2. Move switch 1 and 2 of the RAID Level Switch Selectors to the ON position. Fig. 4.1.3 ■ 4.1.4. RAID 0 + 1 1. Power off the LaCie Biggest Quadra. 2. Move switch 1 of the RAID Level Switch Selectors to the ON position. Move switch 2 of the RAID Level Switch Selectors to the OFF position. Fig. 4.1.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 24 4.2. Creating an Array ■ 4.2.1. Initializing the Disks To initialize the disks in your array: 1. Make sure the Biggest Quadra is turned off and the power cable is not connected. 2. Ensure that the RAID level is correctly set and configured. Refer to section 4.1. Setting the RAID Level. 3. Ensure that each of the individual drive trays is not locked and then pull each drive tray handle to release the latch.
LaCie Biggest Quadra User Manual If you are resetting the RAID level after having used the LaCie Biggest Quadra at another RAID level, the LaCie Biggest Quadra will display a warning on the LCD, asking if you are certain that you want to initialize the new RAID array. The initialization process will erase any data on the disks. The LCD Display of the LaCie Biggest Quadra will issue a “Create New RAID” message. Press the Enter button to select Yes, or press the Menu button to select No.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 26 ■ 4.2.2. Managing Volumes over 2TB in Windows Important Info: The Lacie Biggest Quadra supports over 2TB capacity on all operating systems except Windows 2000 and Windows XP which are limited to 2TB. In Windows 2000 and Windows XP, the maximum capacity which will mount, regardless of the RAID mode selected, is 2TB.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 27 4.3. Connecting to a Host Computer Once the LaCie Biggest Quadra has finished the initialization of the array, you will be ready to connect the LaCie Biggest Quadra to a host computer. This section is divided into the three different interface connectivity methods: USB, FireWire and eSATA. Important Info: The initialization must be completed before connecting the interface cable.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 28 ■ 4.3.1. Connecting to the Host Computer via FireWire 1. Follow the steps in sections 4.1. Setting The RAID Level and 4.2. Creating an Array to establish a RAID array. 2. Connect the 9-pin end (A) of the FireWire 800 cable into the FireWire 800 port on the back of the LaCie Biggest Quadra (Fig. 4.3.1.A/B). 3. Connect either the other end of the 9-pin FireWire 800 cable (B) into an available FireWire 800 port on your computer (Fig. 4.3.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 29 ■ 4.3.2. Connecting to the Host Computer via Hi-Speed USB 2.0 1. Follow the steps in sections 4.1. Setting The RAID Level and 4.2. Creating an Array to establish a RAID array. 2. Connect the Hi-Speed USB 2.0 cable into the HiSpeed USB 2.0 port on the back of the LaCie Biggest Quadra (A). 3. Connect the other end of the Hi-Speed USB 2.0 cable into an available USB port* on your computer (B).
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 30 ■ 4.3.3. Connecting to the Host Computer via eSATA 1. Follow the steps in sections 4.1. Setting The RAID Level and 4.2. Creating an Array to establish a RAID array. 2. Connect the eSATA cable to the eSATA port on the back of the LaCie Biggest Quadra (A). 3. Connect the other end of the eSATA cable to an available eSATA port on your computer (B).
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 31 4.4. Setting the LCD Display Time & Date To change the time and date on the LCD Display, press and hold the Enter/Mute button (A) for five seconds. Release the button to display the date and time settings screen. To adjust the time and date values, use the Scroll button (B) on the left-side of the LCD Display to change the values (Fig. 4.4.A). Press the Enter button to confirm your selection and move to the next value.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 32 4.5. Formatting and Partitioning Before the LaCie Biggest Quadra array can be fully utilized, it needs to be formatted. During this process, the array can also be customized with partitions. Formatting a disk consists of the following: the operating system erases all of the bookkeeping information on the disk, tests the disk to make sure that all of the sectors are reliable, marks bad sectors (i.e.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 33 8. Click Next. 9. Click Next. 10. Click Next. 11. Click Next. 12. In this window (Fig. 4.5.1.C), you have the option of selecting the Quick Format option. This allows a much faster format; however, this will disallow Disk Management to check the drive for errors (recommended). Click Next. Technical note: For a more detailed discussion on the various file system formats and partitioning, please refer to section 7.1. File System Formats.
LaCie Biggest Quadra User Manual Setting Up the Biggest Quadra page 34 ■ 4.5.2. Mac Users Important Info: Before beginning the format and partition process, ensure that there are no warning or error i messages being displayed on the LCD Display of the LaCie Biggest Quadra. 1. If it is not already on, power on the host computer. 2. As soon as the array is detected by your computer, it will mount to the desktop as an untitled device. 3. From Finder, use the Go menu and open the Utilities folder.
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 35 5. Using the LaCie Biggest Quadra 5.1. Disk Status and Activity Indicators This list is a key to the messages of the Disk Status Indicator and Disk Activity Indicator on each of the individual Drive Bays.
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 36 5.2. LCD Display Messages The status of the LaCie Biggest Quadra controller and array can be viewed through the LCD Display. By using the Menu button to scroll through the messages, the following information is available: RAID level and capacity Disk model Disk DMA mode and capacity Firmware version Serial number Fan and temperature status ■ 5.2.1.
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 37 ■ 5.2.2. Rebuild Messages These LCD Display messages may appear during a rebuild phase. LCD Display Dx Rebuild xx.x Total: xxxxGB Dx Rebuild 100% xxxxGB OK! Dx Rebuild Fail xxxxGB
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 38 ■ 5.2.3. Failure and Error Messages These messages will be displayed in the event of a RAID or disk failure, or an error during a process. RAID Failure Messages LCD Display RAID Fail code: 0 RAID Fail code: 1 <----> RAID Fail code: 2 Message Message Cleared When... The RAID array failed. There are not enough disks for the RAID array to operate. ❖ A disk is re-installed The RAID array failed.
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 39 RAID Configuration Failure Message LCD Display Message Message Cleared When... RAID Level Unmatched The setting of the RAID Level Switch Selectors does not match the existing RAID level. ❖ The LaCie Biggest Quadra is shut down and the RAID Level Switch Selectors are re-set to their original RAID level RAID Fail code: 1 <----> The setting of the RAID Level Switch Selectors does not match the existing RAID level.
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 40 Disk Initialization LCD Display Biggest Quadra Initialize Disks Message Message Cleared When... The disks are spinning up. ❖ The LaCie Biggest Quadra has completed disk initialization Message Message Cleared When... The LaCie Biggest Quadra has been powered on successfully. ❖ The LaCie Biggest Quadra has completed disk initialization Message Message Cleared When... Displays the RAID level and capacity.
LaCie Biggest Quadra User Manual Using the Biggest Quadra page 41 Firmware Version LCD Display Firmware Ver: x.xx Message Message Cleared When... Displays the firmware version. ❖ The Menu button is pressed Message Message Cleared When... Displays the fan speed and temperature in degrees Celsius. ❖ The Menu button is pressed Message Message Cleared When... Displays the serial number of the LaCie Biggest Quadra.
LaCie Biggest Quadra User Manual Maintaining the Biggest Quadra page 42 6. Maintaining Your LaCie Biggest Quadra 6.1. Removing/Replacing A Drive In the event that an individual hard disk fails in the LaCie Biggest Quadra, please contact your LaCie reseller or LaCie Customer Support. Additional, spare drive trays with pre-installed hard disks may also be purchased (sold separately). CAUTION: Do NOT attempt to replace a hard disk yourself. Removing a hard disk from a drive tray will void the warranty. 6.
LaCie Biggest Quadra User Manual Technical Information page 43 7. Technical Information 7.1. File System Formats ■ Mac Users Mac OS 10.x Users You may customize the drive by reformatting and/or partitioning the drive with separate file system formats. For optimal performance in Mac OS environments, format and partition the drive as one large Mac OS Extended volume. Mac OS Extended (HFS+) Mac OS Extended refers to the file system used by Mac OS 8.1 and later.
LaCie Biggest Quadra User Manual Technical Information page 44 ■ Windows Users There are basically two file system formats for Windows: FAT 32 and NTFS. The following information will hopefully make choosing one or the other a little easier. FAT 32 FAT is an acronym for File Allocation Table, which dates back to the beginnings of DOS programming. Originally, FAT was only 16 bits, but after the second release of Windows 95 it was upgraded to 32 bits, hence the name FAT 32.
LaCie Biggest Quadra User Manual Technical Information page 45 7.2. Available Storage Capacity A gigabyte (GB) means 1,000,000,000 bytes. In order to utilize a hard disk drive, it has to be formatted first. Formatting a disk consists of the following: the operating system erases all of the bookkeeping information on the disk, tests the disk to make sure that all of the sectors are reliable, marks bad sectors (i.e.
LaCie Biggest Quadra User Manual Technical Information page 46 ■ 7.3.1. FireWire 800 Ports and Performance To utilize the newly enhanced FireWire 800 performances, your computer must be equipped with a FireWire 800 host bus adapter card (either sold separately, or integrated by your computer’s manufacturer); these host bus adapter cards include one or more FireWire 800 ports, and you must be running Mac OS 10.2.
LaCie Biggest Quadra User Manual Technical Information page 47 ■ 7.3.2. Hi-Speed USB 2.0 Ports and Performance To utilize the enhanced Hi-Speed USB 2.0 performance, your computer must be equipped with a HiSpeed USB 2.0 host bus adapter card (either sold separately, or integrated by your computer’s manufacturer) and the appropriate drivers. These host bus adapter cards, which include one or more USB ports, are shipped with special Hi-Speed USB 2.0 drivers that enable the computer to control the card.
LaCie Biggest Quadra User Manual FireWire Questions & Answers page 48 8. FireWire Questions & Answers What Does IEEE 1394 Mean? IEEE (the Institute of Electrical and Electronics Engineers) refers to the engineering corps that developed the 1394th standard, defining the high-performance serial input/output (I/O) bus used to connect peripheral devices.
LaCie Biggest Quadra User Manual both the computer and consumer electronics industries. Whether connecting game consoles, personal video recorders, home stereo equipment, digital TVs, hard drives, CD/DVD-RW drives, printers, scanners, tape drives or other digital hardware equipment, FireWire is well-suited to handle all these various requirements. With the advent of the new FireWire 800 standard, the revolution created by the original will only grow.
LaCie Biggest Quadra User Manual USB Questions & Answers page 50 9. USB Questions & Answers What Are The Benefits Of The USB Interfaces? ❖ Cross-platform: Use your USB peripherals on both Mac and Windows platforms. ❖ “Hot Swappable”: No need to shut down or restart your computer when adding or removing a USB device. Plug it in and its ready. ❖ Automatic configuration: Once your device is connected, your computer recognizes the device and automatically configures the necessary software.
LaCie Biggest Quadra User Manual If you buy a hub, make sure that it supports per-port switching. This function prevents the entire chain of peripherals from freezing up if one of them is not working properly or is down. Will Hi-Speed USB 2.0 Devices Work On USB Hubs And Vice Versa? You can use your Hi-Speed USB 2.0 devices with USB hubs, but the peripherals will be limited to USB performance levels. USB Questions & Answers page 51 be able to connect USB devices to Hi-Speed USB 2.
LaCie Biggest Quadra User Manual USB Questions & Answers page 52 10. eSATA Questions & Answers What is eSATA? Your LaCie d2 Quadra Hard Drive uses the latest in SATA technology, allowing interface (or bus) transfer rates of up to 1.5Gb/s. SATA technology was originally developed to serve as an internal interface, delivering improved performance to internal connections.
LaCie Biggest Quadra User Manual and software compatibility with Parallel ATA, and should be transparent to both the BIOS and operating system. Simply add more Serial ATA links to increase the number of connectivity points in your system. What are the ideal uses of Serial ATA? Although the specification supports all ATA and ATAPI devices (i.e. CD, DVD, tape drives, etc.), and delivers superior performance than both Hi-Speed USB 2.
LaCie Biggest Quadra User Manual Troubleshooting page 54 11. Troubleshooting In the event that your LaCie hard drive is not working correctly, please refer to the following checklist to find out where the problem is coming from. If you have gone through all of the points on the checklist and your drive is still not working correctly, please have a look at the FAQs that are regularly published on our website – www.lacie.com. One of these FAQs may provide an answer to your specific question.
LaCie Biggest Quadra User Manual Troubleshooting page 55 Problem Possible Solutions The LaCie Biggest Quadra is not recognized by the host computer. Ensure that the interface cable (either FireWire 800 or Hi-Speed USB 2.0) is securely attached to both the LaCie Biggest Quadra and the host computer. Check the LCD Display of the LaCie Biggest Quadra for error messages. I was creating a RAID 5 array, and a disk failed.
LaCie Biggest Quadra User Manual Contacting Customer Support page 56 12. Contacting Customer Support ■ Before You Contact Technical Support 1. Read the User Manual and review the Troubleshooting section. 2. Try to isolate the problem. If possible, make the drive the only external device on the CPU, and make sure that all of the cables are correctly and firmly attached.
LaCie Biggest Quadra User Manual Contacting Customer Support page 57 12.1. LaCie Technical Support Contacts LaCie Asia, Singapore, and Hong Kong LaCie Australia LaCie Belgium LaCie Canada LaCie Denmark LaCie Finland LaCie France LaCie Germany LaCie Italy LaCie Japan LaCie Netherlands LaCie Norway LaCie Spain LaCie Sweden LaCie Switzerland LaCie United Kingdom LaCie Ireland LaCie USA Contact us at: http://www.lacie.com/asia/contact/ Contact us at: http://www.lacie.
LaCie Biggest Quadra User Manual Warranty Information page 58 13. Warranty Information LaCie warrants your LaCie Biggest Quadra and Drive Bays against any defect in material and workmanship, under normal use, for the period designated on your warranty certificate. In the event this product is found to be defective within the warranty period, LaCie will, at its option, repair or replace the defective LaCie Biggest Quadra and/or Drive Bay(s).