User manual

LaCinema Mini HD Bridge Setting Up: Connecting to TV
User Manual page 26
4.2. STEP 2: Connect the Ethernet
Cable
NOTE: If you prefer to connect to the network wirelessly, skip this
step. You will set up wireless in 4.4. STEP 4: Complete the Installa-
tion Wizard.
1. Connect the Ethernet cable to the Ethernet port on the back of
the LaCinema Mini HD Bridge (Fig. 35).
2. Connect the other end of the Ethernet cable into an available
Ethernet LAN (local area network) port on your router or hub
(refer to your router or hub’s documentation if necessary). Allow
a few moments for your network to recognize the drive.
Now move on to the next step, 4.3. STEP 3: Connect the Power
Supply.
Fig. 35