User manual

LaCinema Mini HD Bridge Reformatting the LaCinema Mini HD Bridge
User Manual page 55
8.1. Windows XP Users
The steps listed below will help you format and partition your disk
drive using Windows XP. For more information on choosing the op-
timal file format, refer to 8. Reformatting the LaCinema Mini HD
Bridge.
CAUTION: Following these steps will erase everything from the
drive. If you have information that you want to protect or continue to
use, back up this information before performing these steps.
1. Make sure the drive is connected to and mounted on the com-
puter.
2. Right-click My Computer and select Manage.
3. From the “Computer Management” window, select Disk Man-
agement (located below the Storage group).
4. If the “Initialize and Convert Disk Wizard” window appears,
click Cancel.
5. Windows will list the hard drives that are installed on the system.
Locate your LaCie hard disk drive (Fig. 95). If there is a red circle
with a white line, you must initialize the disk. Right-click the icon
to select Initialize.
6. In the rectangular box to the right that says “Unallocated” or
lists partitions from a previous format, right-click and select New
Partition…
7. On the first page of the New Partition Wizard, click Next (Fig.
96).
8. Select the Primary or Extended option (Fig. 97) and click Next.
continued on next page >>
Fig. 95
Fig. 96
Fig. 97