User's Manual
Table Of Contents
- Contents
- Introduction
- Features
- System Overview
- System LEDs
- Cables
- Connect your LaCie 2big Dock Thunderbolt 3
- Operation
- Docking Features
- Expansion Port
- Daisy Chain and Power Delivery
- Manage RAID
- Hard Drive Maintenance
- Formatting and Partitioning
- Frequently Asked Questions
- All users
- Problem: My file transfers are too slow.
- Problem: I connected LaCie 2big Dock to my computer but it does not power on and I cannot see the device in LaCie RAID Manager.
- Problem: I want to change the RAID level.
- Problem: I disconnected my computer from the LaCie 2big Dock during RAID synchronization or initialization.
- Problem: I have a USB-C hard drive that I want to add to the Thunderbolt 3 daisy chain.
- Problem: I must password protect and/or encrypt my hard drive.
- Problem: I'm receiving file transfer error messages.
- Problem: DisplayPort to HDMI display does not work.
- Mac
- Windows
- All users
- Regulatory Compliance
Thunderbolt 3 connecon
Connect the included Thunderbolt 3 cable to:
1. 2big Dock
2. PC or Mac
USB 3.1 Gen 1 or 2 connecon
PC or Mac with a USB-C port
The Thunderbolt 3 cable can be used to connect the USB 3.1 (USB-C) port on the LaCie 2big Dock to a USB
3.1 (USB-C) port on your computer.
Connect the included Thunderbolt 3 cable to:
1. 2big Dock. Make certain to use the correct port with the text .
2. PC or Mac. Connect to a USB-C port with the USB 3.1 Gen 1 or USB 3.1 Gen 2 icon.
Important info regarding the ports: The LaCie 2big Dock can be connected to a computer using
the USB 3.1 port or the Thunderbolt 3 port. However, do not connect both ports to a single
computer at the same time, or connect each port to separate computers.
20LaCie 2big Dock Thunderbo lt 3
1/10/20