User's Manual
Table Of Contents
- Contents
- Introduction
- Features
- System Overview
- System LEDs
- Cables
- Connect your LaCie 2big Dock Thunderbolt 3
- Operation
- Docking Features
- Expansion Port
- Daisy Chain and Power Delivery
- Manage RAID
- Hard Drive Maintenance
- Formatting and Partitioning
- Frequently Asked Questions
- All users
- Problem: My file transfers are too slow.
- Problem: I connected LaCie 2big Dock to my computer but it does not power on and I cannot see the device in LaCie RAID Manager.
- Problem: I want to change the RAID level.
- Problem: I disconnected my computer from the LaCie 2big Dock during RAID synchronization or initialization.
- Problem: I have a USB-C hard drive that I want to add to the Thunderbolt 3 daisy chain.
- Problem: I must password protect and/or encrypt my hard drive.
- Problem: I'm receiving file transfer error messages.
- Problem: DisplayPort to HDMI display does not work.
- Mac
- Windows
- All users
- Regulatory Compliance
1. Make sure the storage device is connected to and mounted on the computer.
2. Go to Search and then type diskmgmt.msc. In the search results, double click Disk Management.
3. From the list of storage devices in the middle of the Disk Management window, locate your LaCie
device.
4. The partition must be available to format. If it is currently formatted, right click on the partion and then
choose Delete.
5. To create a new partition, right click on the volume and select New Simple Volume. Follow the on-screen
instructions when the New Simple Volume Wizard appears.
44LaCie 2big Do ck Thunderbolt 3
1/10/20