_warning MAXIMUM LOAD 78 1b / 35kg (= Estimated Time for Assembly « 120 mind Weight Limitation 201b sc 78 |b Assemble the furniture on empty carton, carpet, or rug to prevent scratches or damage. This furniture requires 2 people to assemble. Make sure no parts are missing or damaged before assemble.
Board Identification Not actual size Sor” SS Top panel X1 Side panel Vertical panel X2 Adjustable shelf X2 Shelf Back panel X1 Back panel X2 Bottom rail X1 Support bracket X1 Bottom rail X2 4
Hardware List Actual size 8 ee 215 x 10mm 28 x 30mm _A [x40+1] |B [x40+1) | C | *30+1] CAM LOCK CAM BOLT WOOD DOWEL , ¥ 3.
Push a CAM LOCK into the part The arrow in the CAM LOCK must point toward the hole on the STEP 2 edge of the board CAM LOCK 215 x 10mn HOLE ARROW
ARROW must point toward the hole on the Push a CAM LOCK into the part The arrow in the CAM LOCK edge of the board STEP HOLE
STEPS 215 x 10mm Push a CAM LOCK into the part The arrow in the CAM LOCK must point toward the hole on the edge of the board HOLE 10 CAM LOCK ARROW
STEP 7 215 x 10mm Push a CAM LOCK into the part The arrow in the CAM LOCK must point toward the hole on the edge of the board x 14 | CAM LOCK ARROW 12
STEP 8 215 x 10mn Push a CAM LOCK into the part The arrow in the CAM LOCK must point toward the hole on the edge of the board WED HOLE -M i d CAM LOCK
STEP 11 215 x 10mn Push a CAM LOCK into the part The arrow in the CAM LOCK must point toward the hole on the edge of the board
FURNITURE CARE AND MAINTENANCE Particleboard Thank you for your purchase. We want your item to last as long as possible. To ensure the product gives you years of service, please refer to this care and maintenance guide. MAINTENANCE Tighten all bolts and screws again within the first 2 weeks of assembly Check the tightness of all bolts every 2 months, tighten them if necessary * + CLEANING | . Clean the surface of the PB(Particleboard) with a lightly dampened cloth.
