User's Guide

- 11 -
Scenario
The VitalSim can run preprogrammed scenarios, generated on a
PC-based scenario builder program.
These scenarios can be transferred too the Base unit using the
VitalSim PC utility program.
Execution of a scenario is started using the “Scen” button on the
Remote Control.
Logs and Scenarios are synchronized in the following manner:
• A new log is started when a scenario is started.
•
Pause and Resume affects both scenario and log.
To start a scenario, press the “Scen” button.
It usually takes a little time to transfer all the scenario information to the
Remote Control.
Select the desired scenario and press OK.
The scenario will start, the clock is set to 0 and a new log is started.
The current log will be erased.