Manual

29
SETUP
Replacing and Filling Tibial IO Module with Blood
1 Attach the Tibial IO bag to the Tibial tube and close off
the pinch clamp.
2 Roll the leg band, to expose the Tibial IO module.
3 Remove the IO tape. Then remove the Tibial IO unit
from the leg.
4 Remove the tube from the Tibial IO module.
5 Remove the Tibial IO Pad from the Tibial IO
chassis.
6 Before replacing the new Tibial IO, ensure that the
nipple is retracted in the Tibial IO Pad.
7 Fit the new Tibial IO pad into the chassis. 8 Secure the Tibial IO pad in place by pressing the rear
of the pad with thumbs until the nipple moves forward
and locks the unit in place.
Cautions and WarningsFeaturesSetupMaintenanceSpare Parts Troubleshooting