Installation & Assembly

INSTALLATION INSTRUCTIONS

ASME A112.18.1 / CSA B125.1

1. Before Proceeding

We recommend calling a professional if you are

uncertain about installing this product! This product

should be installed in accordance with all local and

state plumbing and building code requirements.

2. Shut Off Water Supplies

Locate the water supply inlets and shut off both the

hot and cold water supply valves. If you are

replacing an existing faucet, remove the old faucet.

Clean the sink surface thoroughly in preparation for

the new faucet.

3. Secure New Faucet

Position the faucet on the sink. If the sink surface is

uneven, a small amount of silicone sealant may be

needed. Secure locknuts on the shank and hand

tighten.

 Model 2002

 RV/Mobile Home Series

 2 or 3 Hole Installation

You may need:

For easy installation of your faucet

please:

 READ ALL the instructions,

warnings, care and maintenance

information before beginning

 Purchase the correct water supply

hook-up

4. Connect to Water Supplies (Hook-Ups Not

Provided). Flush System/Check for Leaks

Connect the hot and cold water supplies to the

shanks as shown. Remove the aerator. Turn the

handle all the way on. Turn on hot and cold

water supplies and flush water lines for one

minute. This flushes away any debris that could

cause damage to internal parts. Check all

connections for leaks. Replace aerator. Re-

tighten if necessary, but do not over tighten.

PAGE 1
INSTALLATION INSTRUCTIONS    Model 2002 RV/Mobile Home Series 2 or 3 Hole Installation You may need: 1. Before Proceeding We recommend calling a professional if you are uncertain about installing this product! This product should be installed in accordance with all local and state plumbing and building code requirements. 2. Shut Off Water Supplies Locate the water supply inlets and shut off both the hot and cold water supply valves. If you are replacing an existing faucet, remove the old faucet.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although the finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. WARNING: SCRUBBING BUBBLES® BATHROOM CLEANER, LYSOL® BASIN TUB AND TILE CLEANER, and all other chemical cleaners must not be used on the faucet body and handle. Use of these cleaners can crack and/or severely damage the faucet.