MSDS

ManualsBrandsLaHabra ManualsBuilding materials4 oz. Liquid Color #A-475 Viejo

MATERIAL SAFETY DATA SHEET

1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT CATEGORY: ZMSDSLHLIQCOL REVISION DATE: 02/02/11

PRODUCT NAME: LAHABRA LIQUID COLOR

MANUFACTURER: PAREXUSA, Inc.

4125 E. LA PALMA AVE

SUITE 250 HMIS CODES:

ANAHEIM, CA 92807 HEALTH 2

EMERGENCY PHONE NUMBER: 800-424-9300 FLAMMABILITY 1

INFORMATION PHONE NUMBER: 951-653-3549 REACTIVITY 0

NAME OF PREPARER: CARLOS NONES PROTECTION B

2 - COMPOSITION/INFORMATION ON INGREDIENTS

Components / Exposure Limits CASRN

---------------------------------------------------------------------------------------------------------------------

*** No reportable quantities are present. ***

3 - HAZARDS IDENTIFICATION - POTENTIAL HEALTH EFFECTS

EYES: Contact with eyes may cause irritation. SKIN: Prolonged or repeated contact with skin may cause

irritation. INGESTION: May be harmful if ingested. INHALATION: When applying this product, the vapors

and/or dust produced may cause irritation to the respiratory tract. CHRONIC (CANCER) INFORMATION: WARNING

- See section 11, TOXICOLOGICAL INFORMATION for details. Also see section 15. TERATOLOGY (BIRTH DEFECTS):

Not known to cause birth defects. REPRODUCTIVE INFORMATION: Not known to cause reproductive harm.

4 - FIRST AID MEASURES

EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

SKIN: Wash affected area thoroughly with soap and water. Remove contaminated cloths and launder before re-

use. INGESTION: Do not induce vomiting. Get medical attention immediately. INHALATION: Remove to fresh

air. If not breathing, give artificial respiration. If having difficulty breathing, give oxygen. Get

immediate medical attention.

5 - FIRE FIGHTING MEASURES

FLASH POINT: Not Applicable - Water Based Product.

Method: Not Applicable.

FLAMMABLE LIMITS:

Lower flammable limit: Not Applicable.

Uppoer flammable limit: Not Applicable.

AUTOIGNITION TEMPERATURE: Not Applicable.

HAZARDOUS COMBUSTION PRODUCTS: Incomplete combustion of dried product can yield low molecular weight

hydrocarbons, carbon monoxide, and carbon dioxide.

Summary of content (5 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT CATEGORY: ZMSDSLHLIQCOL REVISION DATE: 02/02/11 PRODUCT NAME: LAHABRA LIQUID COLOR MANUFACTURER: PAREXUSA, Inc. 4125 E.
PAGE 2
MATERIAL SAFETY DATA SHEET EXTINGUISHING MEDIA: For the dried product, use carbon dioxide, dry chemical, or alcohol foam extinguishing media. FIREFIGHTING INSTRUCTIONS: Respiratory equipment should be worn to avoid inhalation of combustion products. Water should not be used except as fog to keep nearby containers cool. Water may be used to cool closed containers to prevent pressure build-up and explosion when exposed to extreme heat. 6 - ACCIDENTAL RELEASE MEASURES Ventilate area.
PAGE 3
MATERIAL SAFETY DATA SHEET 10 - STABILITY AND REACTIVITY CONDITIONS TO AVOID: None known. CHEMICAL STABILITY: Stable. HAZARDOUS DECOMPOSITION PRODUCTS: By fire - low molecular weight hydrocarbons, carbon dioxide and monoxide. HAZARDOUS POLYMERIZATION: Will not occur. INCOMPATIBILITY: None known.
PAGE 4
MATERIAL SAFETY DATA SHEET *** No reportable quantities are present. *** CLEAN AIR ACT - SECTION 112: This product contains the following components present at or above the minimum level and listed as Hazardous Air Pollutants: *** No reportable quantities are present. *** This product contains the following components present at or above the minimum level and listed as Extremely Hazardous Air Pollutants: *** No reportable quantities are present.
PAGE 5
MATERIAL SAFETY DATA SHEET are listed by the California EPA as materials known to the State of California to cause cancer, (and/or) birth defects, (and/or) other reproductive harm. Chemical Name CAS Number ------------- ---------- *** No reportable quantities are present. *** 16 - OTHER INFORMATION The information and recommendation set forth herein are believed to be accurate. Because some of the information used to prepare this document is derived from information provided to PAREXUSA, Inc.