SDS

3
Components
Water
Acrylic Copolymer
Texanol
Liquid Defoamer
Biocide
Additional information:
4
5
General information:
Flash point:
6
7
0.1-0.5
Chemical characterization
7732-18-5
20-25
Non-Hazardous
70-80
25265-77-4
1.0-3.0
5120-87-4
Respiratory equipment should be worn to avoid inhalation of combustion products.
Water should not be used except as fog to keep nearby containers cool. Water may be
used to cool closed containers to prevent pressure build-up and exposed to extreme
heat.
For dry material, collect by sweeping and scooping. Transfer collected material to a
container, being careful to minimize creation of dust. For wet material, scoop material
up and transfer to an open container. Allow material to dry before disposal.
Fire-fighting measures
n/a
Water- based product.
After eye contact:
After swallowing:
n/a
64742-65-0
Remove to fresh air. If not breathing, give artificial respiration. If having difficulty
breathing, give oxygen. Get immediate medical attention.
Wash affected area thoroughly with soap and water. Remove contaminated clothes
and launder before re-use.
For the dried product, use carbon dioxide, dry chemical, or alcohol foam.
Wear appropriate protective equipment when working with this product. Promptly remove dusty clothing, or clothing wet with
product mix, and launder before re-using. Wash thoroughly after exposure to product mixtures. Keep out of reach of children.
Store in a dry location. Atmospheric temperatures and pressures do not affect the shelf life of this product.
Hazardous combustion products:
Keep spilled products out of sewers, streams, and water systems.
Measures for environmental protection:
Measures for cleaning/collecting:
Additional information:
Protective equipment:
See section 13 and section 15 for specific regulatory information concerning this
product.
Handling:
Handling and storage
n/a
Firefighting instructions:
General information:
After inhalation:
After skin contact:
Composition/information on ingredients
First aid measures
Storage:
Suitable extinguishing agents:
CAS #
% Composition
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical
attention.
Do not induce vomiting. Get medical attention immediately.
Accidental release measures
n/a
Incomplete combustion of dried product can yield low molecular weight
hydrocarbons, carbon monoxide, and carbon dioxide.
Adacryl Admix Bonding Agent 2