MSDS

8
CAS #
10 mg/m
3
0.05 mg/m
3
5 mg/m
3
5 mg/m
3
5 mg/m
3
5 mg/m
3
5 mg/m
3
15 mg/m
3
10 mg/m
3
5 mg/m
3
5 mg/m
3
Additional information:
eye protection
9
form
color
odor
pH
melting point/melting point range
boiling point/boiling point range
evaporation rate:
vapor density:
Specific gravity:
Solubility in/Miscibility with water:
Density at 20°C:
VOC:
Exposure controls/personal protection
Name
Exposure Limit
OSHA TWA
OSHA TWA (total)
Ingredients with limit values that require monitoring at the workplace:
2.77
12-13 in water
0.0 g/L (0.0 lb/gal)
Change in condition:
n/a
Physical and chemical properties
no distinct odor
13058-62-0
Calcium hydroxide
n/a
n/a
n/a
ventilation
NIOSH PEL 10
Use local exhaust. General exhaust acceptable if the exposure to materials
above is maintained below applicable exposure limits. Refer to OSHA Standards
1910.94, 1910.107, and 1910.108.
Aluminum Silicate
OSHA PEL (total)
OSHA PEL (Respirable)
Additional information about design of technical facilities:
OSHA PEL 15
OSHA PEL (Repirable)
dispersible
23.09 lb/gal
The lists valid during the making were used as a basis.
General information:
powdered solid
Prevent prolonged or repeated contact by using rubber gloves and appropriate
protective clothing.
skin protection
Wear safety glasses to reduce the potential for eye contact.
Personal protective equipment:
If personal exposure cannot be controlled below applicable limits by ventilation,
wear a properly fitted organic vapor/particulate respirator approved by NIOSH
for protection against materials described above.
respiratory protection
White or Colored
1317-65-3
Calcium Carbonate
NIOSH 10mg/m3 TWA(Total)
OSHA 15mg/m3 TWA
14808-60-7
Crystalline Slica
ACGIH TLV (Respirable)
1332-58-7
65997-15-1
Portland cement
ACGIH TLV (total)
n/a