User's Manual

14 Operating manual
Failed pairing
There is no limit on the number of attempts to pair the device with the PREMIUM mobile telephone
provision.
Pairing will fail if the time limit for password entry is exceeded, an incorrect PIN is entered ⇒ or if
3 user profiles already existed and none has been deleted.
Start the pairing process again if pairing fails even though the data entered were correct.
Copy of the telephone book
Once pairing has been successfully completed, the entries stored in the mobile telephone's telephone
book
6
are loaded automatically into the data memory of the PREMIUM mobile telephone provision.
This procedure can last for a few minutes depending on the number of entries.
If any changes are subsequently made to the telephone book data on the mobile telephone, the tele-
phone book stored in the vehicle can be updated manually (via the menus Settings/Phone
book/Update ⇒ page 35).
NOTICE
The SIM card will be blocked by the mobile telephone network provider if you enter the SIM
card's PIN code into the PREMIUM mobile telephone provision incorrectly three times in suc-
cession.
To prevent abuse, deactivate “Visibility” on the mobile telephone when the pairing process is
complete.
For data privacy reasons, Volkswagen recommends that you select OK when entering the PIN
code so that the PIN code needs to be entered each time the PREMIUM mobile telephone provision
automatically connects to the mobile telephone.
To carry out the device search, choose a location where you would not expect there to be many
Bluetooth devices, e.g. in a garage. The Bluetooth signal range is approximately ten metres.
Automatic connection


 First read and observe the safety warnings on page 3 and the introductory information
and safety warnings on page 10.
A mobile telephone paired with the PREMIUM mobile telephone provision will be connected automati-
cally to the PREMIUM mobile telephone provision when the ignition is switched on. In Telephone
mode you can define the preferred method for connection of a mobile telephone as premium telepho-
ny or hands-free telephony ⇒ page 25.
If necessary, refer to the operating manual for the mobile telephone for information on automatic
Bluetooth connection (authorisation). If required, switch on authorisation, step 2 ⇒ page 12.
The PREMIUM mobile telephone provision always attempts to establish a connection for premium
telephony. If this fails, it attempts to establish a connection for hands-free telephony ⇒ page 11.
You can use the PREMIUM mobile telephone provision as soon as the telephone basic screen is
shown on the instrument cluster display.
When connecting automatically, the system will first search for the telephone that was last used in
order to reconnect it with the PREMIUM mobile telephone provision. If this mobile telephone is not in