User's Manual

Operation 35
Function Explanation
Blocked Devices
Devices, which have been manually blocked. The
PREMIUM telephone provision will not accept connec-
tion requests from these devices. Each device on the
list can be unblocked.
Delete Lists
Delete a single list or all lists.
Password
View
Display the active password on the instrument cluster
display
Generate New
Generate a new password and display it on the in-
strument cluster display.
WPS
Configuration
The Premuim telephone provision supports two method to set up WLAN security:
WPS PIN and Push Button. Select preferred method and confirm with OK.
Settings
Access Point
Change the acces point for cellular data connectivity.
Manually enter access point name, user name and
password.
Priority
Select priority for voice calls or data (in 2G networks)
and confirm with OK.
Encryption
Activate WLA2 encryption or configure the network as
open WLAN.
Visibility
Activate or deactivate SSID broadcast.
Data Roaming
Select behavior in roaming situations: enable data
traffic, prevent data traffic or always ask.
WLAN Channel
Select the WLAN channel used by the access point.
Reset
Reset to factory settings
Data Counters Current connection
Display data volume since last power up.
Total
Display data volume since last reset of the counter.
Reset
Reset all data counters to zero.
Settings menu


 First read and observe the safety warnings on page 3 and the introductory information
and safety warnings on page 27.
Function Explanation
Phone book
Once the mobile telephone has been connected, the entries stored in its tele-
phone book
20
are loaded automatically into the data memory of the PREMIUM
mobile telephone provision.
20
Depends on the mobile telephone.