User's Manual

LRM and PA Radio
Module
Registers
Document p/n: 9S02-7954-A001 Rev.A
Cattron-Theimeg Inc. Proprietary and Confidential Page 6-8
6. Registers
6.1 Section 1 Registers: Hardware Information Block
Section 1: Hardware Information Block
Addr Type Array
Size
Access Keyword Description Details
0x00 UINT8 1 RWP id RF module ID
0x04 CHAR 14 RWP hwpn HW Part Number
0x12 CHAR 4 RWP hwrev HW Revision
0x16 CHAR 16 RWP sn Serial Number
0x26 UINT8 26 RWP sp Spare Reserved for future usage.
0x40 UINT8 1 RWP cmdef Default operation mode
0x43 UINT16 1 RWP crc HIB CRC (Hardware Info Block)
This section is formatted according the standard Unity RF modules E2PROM data format, described in reference [3].
Hardware Information Block registers are write-protected; writes operations are allowed after the proper key code
has been written in the WP unlock key register
6.1.1 HW Part Number
Hardware part number is a 14 characters ASCII string formatted according to Cattron standard part number format;
[4 digits prefix]-[4 digits number]-[4 digits suffix]. Example: “2PCA-7954-A001”
6.1.2 HW Revision
This field is a 4 characters ASCII representation of the HW Revision. Cattron hardware parts revision is composed
of 2 segments. The first segment is made of one or two letters followed with one or two optional numerical digits.
revision. Examples: “PP3”, “A”
6.1.3 Serial Number
A 16 digits field is reserved for serial numbers. Serial numbers format is not predefined.
6.1.4 Default Operation mode
Default value for the LRM operation mode. LRM operation modes are described in section 6.
6.2 Section 2 Registers: Software Information Block
Section 2: Software Information Block
Addr Type Array
Size
Access Keyword Description Details
0x46 CHAR 14 R swpn SW Part Number Section 3.2.1
0x54 CHAR 10 R swrev SW Revision Section 3.2.2
0x5E UINT16 1 R mapver Register map version Section 3.2.3