User's Manual

Section 1, Page 4 01/2001, CATTRON - THEIMEG
TM
Specifications, continued.
Operator Control Functions – PSEZ & PSCS:
Six large pushbuttons (three-step type only), plus two auxiliary function switches and a
selector for motors A or B, or both A+B.
Battery type:
3-Volt Alkaline Battery Pack (standard).
2.4 Volt re-chargeable Ni-Cad Battery Pack (optional).
3-Volt Alkaline Battery Adapter for use with quantity 2 ‘AAA’ size Alkaline
batteries only (optional).
Battery life (20% Duty Cycle):
3 Volt alkaline battery pack (standard) or re-chargeable Ni-Cad battery pack
(optional). In USA, Canada and non EU countries, battery life is:- Ni-Cad pack
– 50 hours, Alkaline pack – 115 hours, ‘AAA’ Alkaline batteries (using
optional adapter) – 50 hours. In EU countries, battery life is:- Ni-Cad pack – 30
hours, Alkaline pack – 65 hours, ‘AAA’ Alkaline batteries (using optional
adapter) – 25 hours.
Transmit indicator:
Green LED flashes with every transmission.
Low battery indication:
Yellow LED flashes for low battery, low battery alert signal beeps every 10 seconds.
Battery charging:
Internal Ni-Cad battery charging. Optional ‘Standard’ rate (10 hour) or ‘Rapid’
rate (1-hour) Battery Chargers are available for use in countries having 110-120
VAC mains input power. Alternatively, optional ‘Rapid’ or ‘Trickle’ Battery
chargers are available for use in countries having 220-240 VAC mains input
power. An External Battery Charging Unit is also available for use with all
optional CATTRON-THEIMEG
™
battery chargers.
Audio speaker:
For function pushbutton ‘click’ and low battery indication.
Transmitter frequency:
425-447MHz (M) or 447-473MHz (H).