User Manual

-9-
Compenser™ Installation Guide
Installation Guide
The following installation instructions are not meant to be a guide for self
installation, rather than a supporting document for the professional installer.
Should you decide to install the COMPENSER™ yourself, which will void the
RAYTEL LLC Limited Warranty, please read and follow the installation
instructions very carefully and strictly observe all safety precautions.
Required Accessory Items and Tools
To perform the actual installation, the following tools are required:
~ Philips Screwdriver PH 1
~ Universal Pliers
~ Side-Cutting Pliers
~ Variable Speed Hand Drill
~ 3.2 mm Drill Bit (Metal)
~ 9 mm Wrench
~ Multimeter or Test Lamp
~ Vehicle Specific Tools for Removing Coverings
~ Wire Straps
~ 3 cable connector clamps
Getting Started
Before you start with the installation of the COMPENSER™ make sure that all
parts as listed in the Parts List are present. In order to fully operate the
COMPENSER™ you will need the following additional parts and accessories,
which are available through RAYTEL LLC authorized distributors and dealers:
• Mobile Phone Antenna: An external mobile phone antenna is required for
operating the COMPENSER™.
Improper Installation: The installation of the
COMPENSER™ requires special knowledge, abilities and
tools. Improper installation may cause damage to the unit
or to the vehicle! We therefore strongly recommend
having the installation done by a professional installer.