User's Manual
Table Of Contents
- Scope
- M2US50NBT/M2SD50NBT Features Summary
- Specifications
- WLAN Functional Description
- Bluetooth Functional Description
- Electrical Characteristics
- Bluetooth Radio Characteristics
- SDIO Timing Requirements
- Pin Definitions
- Mechanical Specifications
- Mounting
- Reference Schematic of M2US50NBT
- RF Layout Design Guidelines/Precautions
- Regulatory
- FCC and IC Regulatory
- European Union Regulatory
- EU Declarations of Conformity
- Ordering Information
M2US50NBT/M2SD50NBT
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
24
Laird
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852-2268-6567 x026
MECHANICAL SPECIFICATIONS
Figure 4: M.2 mechanical drawings
Note: The Wi-Fi MAC address is located on the product label. The BT MAC address is always be numerically
subsequent to the Wi-Fi MAC address. Therefore, the BT MAC address is Wi-Fi MAC address plus one.
MOUNTING
The M2US50NBT/M2SD50NBT connects to the host via a standard PCI EXPRESS M2 connector.
Kyocera’s (www.Kyocera-connector.com) 6411 series provide 1.8 mm, 2.3 mm and 3.2 mm connector heights.
M2US50NBT/M2SD50NBT is a signal-side component module; Laird recommends part number
24-6411-067-101-897E which has 2.3 mm connector height.
The stand-off mating to the recommend 2.3 mm connector from EMI STOP (www.EMISTOP.com) is part number
F50M16-041525P1D4M. Detail layout and stencil opening are show in Figure 5.