Connected Safety User Instructions for 3M™ Connected Safety components integrated into the TR-600 PAPR. IMPORTANT: Refer to the 3M™ Versaflo™ Powered Air Purifying Respirator (PAPR) Assembly User Instructions for all proper use, operation, care, inspection and maintenance guidance for your TR600 Connected PAPR assembly. 3M™ Connected Safety system components integrated with the PAPR do not have any affect or impact on the respiratory protection provided by the PAPR system or its NIOSH certifications.
• • • • • !!! IMPORTANT READ FIRST !!! Read and understand the contents of these User Instructions prior to use, including all warnings and advisories. This system is for professional occupational health & use only. The 3M™ Connected PAPR System is not designed or approved to meet intrinsic safety standards. Follow all 3M Personal Protective Equipment (PPE) User Instructions for devices that may be used with this system.
Foreword 1 Please read, understand, and follow all safety information contained in the 3M™ Versaflo™ TR-600 Powered Air Purifying Respirator (PAPR) Assembly User Instructions prior to system use. These User Instructions only contain information for the integrated 3M™ Connected Safety system functionalities, operation and use that are independent of the respiratory protection provided by the TR-600 PAPR.
1.3 System Description 3M™ Connected Safety is an Internet-of-Things (IoT) platform designed to connect workers, places, and equipment to promote worker health and safety, compliance workflow, and process automation. A network of connected PPE creates an ecosystem that may help organizations drive worker health and safety, as well as compliance in occupational environments where hazards exist.
2 1. Operation WARNING Worker alerts generated by the connected system should not to be used in place of existing safety program policies, practices and procedures. They are designed to be supplemental to an established safety program. To reduce the risks associated with exposure to workplace hazards which, if not avoided, could result in serious injury or death, users should follow all Safety Supervisor direction on how to respond to alerts that may be experienced.
3 Regulatory FCC ID: DGFPSDTR602CX IC: 458A-PSDTR602CX FCC/ISED Compliance This device complies with Part 15 of the FCC Rules and with ISED’s license-exempt RSS's standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 Warranty 3M warrants the Connected Safety system component parts will be free from defective materials and workmanship at the time of purchase and will cover the parts listed below for the time period of 1 year, provided they are maintained and used in accordance with the product’s User Instructions and/or recommendations.
5 Legal Notices Terms of Service and License for 3M™ Versaflo™ Connected Powered Air Purifying Respirator, 3M™ Connected Safety Hub, and 3M™ Versaflo™ Connected Sensor Software This Agreement is 3M’s Terms of Service and License that governs its relationship among you, the principal on whose behalf you are authorized to act (the “Principal,” with you and the Principal collectively being the “User”), and “3M” (through 3M Company or its Affiliate(s) in the local country in which Software is provisioned or s
3. Permitted Use and License 3.1. 3M hereby grants to User a worldwide, limited, non-exclusive, and non-transferable license to access and use the Software in accordance with this Agreement. The Software is only licensed for use with specified Licensorsupplied systems for the Software and, if applicable, in accordance with any authentication credentials provided by 3M to the User. User agrees not to use, or permit others to use the Software for any purposes beyond the scope of this Agreement.
5.1. 3M may, at its sole discretion, use commercially reasonable efforts to provide support services for the Software to User; however, unless specifically provided for in a separate agreement between 3M and User, in no event, shall 3M be obligated to provide support services to the User. User expressly acknowledges that 3M does not guarantee a specific response time to requests for support services. 6. Warranty 6.1. USE OF THE SOFTWARE IS AT USER’S SOLE RISK.
9.1. User acknowledges, agrees and understands that, in connection with 3M providing User with access to and use of the Software, information resulting from User’s use of the Software may be transmitted to 3M.
https://login.connectedsafety.3m.com/TermsAndConditions/DataProcessingAgreement. 9.9 User shall – as far as permitted by law - indemnify 3M and its directors, officers, agents and employees from and against any direct damages which may incur in connection with a breach for which User is responsible or a breach of other related legislation concerning the protection of personal information by User, its officers, employees, agents and subcontractors. 10.
agreements relating to such information (including relating to collection, storage and use) as required by law. 11.8. Prior Agreement. This Agreement supersedes and replaces any and all prior agreements for the Software previously executed by the User. 11.9. Amendments. 3M will notify User before 3M makes any material changes to terms of this Agreement.
subcontractors. Open Source Notices Open Source Notices for the 3M™ Versaflo™ Connected Powered Air Purifying Respirator, 3M™ Connected Safety Hub, and 3M™ Versaflo™ Connected Sensor Software can be found here: https://login.connectedsafety.3m.
6 Contact Information FOR MORE INFORMATION In United States, contact: Website: www.3m.com/workersafety Technical Assistance: 1-800-243-4630 For other 3M products: 1-800-3M-HELPS or 1-651-737-6501 3M Center, Building 0235-02-W-70 St. Paul, MN 55144-1000 © 3M 2019. 3M is a trademark of 3M Company, used under license in Canada. 3M PSD products are occupational use only.
