Datasheet

ManualsBrandsLaird ManualsFiltersEcE Extrusion Strip 6.4x6.4mm

www.lairdtech.com

EMI ESSENTIALSEMI ESSENTIALS

noitacificepSnoitpircseD

791 B MTSAreppoC muillyreBepyT eriW

Monel

QQ N 281 Class A

025 B MTSAleetS dalC reppoC detalP niT

Elastomer Type Neoprene Sponge MIL-R-6130 Type II, Grade A (Closed Cell) Conditioned

Medium; Temp. Range -24°F to 212°F (-31,1°C to 100°C)

;)lleC desolC( 5913 SMAegnopS enociliS

Temp. Range -103°F to 400°F (-75°C to 204°C)

Silicone Solid ZZ-R-765, Class 2, Grade 50;

Temp. Range -80°F to 500°F (-62,2°C to 260°C)

MATERIAL SPECIFICATIONS

Laird Technologies Elastomer Overall Total

Part No.

Diameter Width Height

8403-0101-50 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

8403-0102-50 0.125 (3,2) 0.750 (19,1) 0.160 (4,1)

8403-0103-50 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

8403-0104-50 0.188 (4,8) 0.750 (19,1) 0.225 (5,7)

8403-0105-50 0.250 (6,4) 0.750 (19,1) 0.285 (7,2)

8403-0106-50 0.250 (6,4) 1.000 (25,4) 0.285 (7,2)

8403-0107-50 0.500 (12,7) 1.000 (25,4) 0.535 (13,6)

Tolerance

.D.OegnaR eziS

To 0.120 (3,1)

0.020 (

0,5)

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8)

)8,0-/0,1+( 030.0-/040.0 +)7,21 ot 9,9( 050.0 ot 093.0

)0,1-/6,1+( 040.0-/260.0 +)4,52 ot 0,31( 000.1 ot 015.0

Laird Technologies Tubing Diameter

Tubing Part No. Diameter (O.D.) Over Wire

8413-0101-64 0.125 (3,2) 0.160 (4,1)

8413-0102-64 0.188 (4,8) 0.225 (5,7)

8413-0103-64 0.250 (6,4) 0.285 (7,2)

8413-0104-64 0.312 (7,9) 0.348 (8,8)

8413-0114-64 0.375 (9,5) 0.383 (9,7)

8413-0105-64 0.375 (9,5) 0.410 (10,4)

8413-0106-64 0.500 (12,7) 0.535 (13,6)

Laird Technologies Elastomer Total Diameter

Part No. Diameter Over Wire

8410-0101-50** 0.062 (1,6) 0.098 (2,5)

8410-0102-50 0.125 (3,2) 0.160 (4,1)

8410-0103-50 0.188 (4,8) 0.225 (5,7)

8410-0104-50 0.250 (6,4) 0.285 (7,2)

8410-0105-50 0.312 (7,9) 0.348 (8,8)

8410-0106-50 0.375 (9,5) 0.410 (10,4)

8410-0107-50 0.500 (12,7) 0.535 (13,6)

Laird Technologies Elastomer Elastomer Total Total

Part No.

Width Height Width Height

8409-0101-50 0.125 (3,2) 0.125 (3,2) 0.160 (4,1) 0.160 (4,1)

8409-0102-50 0.188 (4,8) 0.125 (3,2) 0.225 (5,7) 0.160 (4,1)

8409-0104-50 0.188 (4,8) 0.188 (4,8) 0.225 (5,7) 0.225 (5,7)

8409-0130-50 0.250 (6,4) 0.062 (1,6) 0.270 (6,9) 0.082 (2,1)

8409-0103-50 0.250 (6,4) 0.125 (3,2) 0.285 (7,2) 0.160 (4,1)

8409-0105-50 0.250 (6,4) 0.250 (6,4) 0.285 (7,2) 0.285 (7,2)

8409-0125-50 0.375 (9,5) 0.125 (3,2) 0.410 (10,4) 0.160 (4,1)

8409-0166-50 0.375 (9,5) 0.250 (6,4) 0.410 (10,4) 0.285 (7,2)

8409-0126-50 0.375 (9,5) 0.375 (9,5) 0.405 (10,3) 0.405 (10,3)

8409-0158-50 0.500 (12,7) 0.125 (3,2) 0.518 (13,2) 0.143 (3,6)

8409-0106-50 0.500 (12,7) 0.250 (6,4) 0.535 (13,6) 0.285 (7,2)

8409-0132-50 0.500 (12,7) 0.250 (6,4) 0.535 (13,6) 0.285 (7,2)

8409-0161-50 0.500 (12,7) 0.312 (7,9) 0.540 (13,7) 0.352 (8,9)

8409-0117-50 0.500 (12,7) 0.500 (12,7) 0.535 (13,6) 0.535 (13,6)

8409-0176-50 0.750 (19,1) 0.250 (6,4) 0.785 (19,9) 0.285 (7,2)

8409-0168-50 1.000 (25,4) 0.250 (6,4) 1.035 (26,3) 0.285 (7,2)

8409-0173-50 1.250 (31,8) 0.500 (12,7) 1.272 (32,3) 0.567 (14,4)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/-0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (

1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/-0.060 (+2,3/-1,5)

Tolerance

thgieHhtdiWegnaR eziS

To 0.120 (3,1) + 0.030/- 0.020 (+0,8/-0,5) + 0.030/- 0.020 (+0,8/-0,5)

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8)

0.030 (

0,8)

0.390 to 0.050 (9,9 to 12,7)

0.046 (±1,2)

0.046 (

1,2)

0.510 to 1.000 (13,0 to 25,4)

0.062 (±1,6)

0.062 (

1,6)

Elastomer

Height

Rectangular with Sponge Elastomer

Total Height

Including

Knitted Wire

Round with Sponge Elastomer

Total

Including

Knitted Wire

Elastomer

Diameter

Round with Silicone Elastomer

Total

Including

Knitted Wire

Elastomer

Diameter

Single Fin with Sponge Elastomer

Total

Height

Including

Knitted

Wire

Overall

Width

Including

Knitted

Wire

Elastomer Dia.

The suffix “50” is BeCu neoprene sponge. For other materials, replace the suffix “50” as follows: 54-Neoprene

sponge and Monel; 52-Silicone sponge and beryllium copper; 55-Silicone sponge and Monel; 60-Neoprene sponge

and tin plated copper clad steel; 61-Silicone sponge and tin plated copper clad steel.

The suffix “50” is BeCu neoprene sponge. For other

materials, replace the suffix “50” as follows:

54-Neoprene sponge and Monel; 52-Silicone sponge

and beryllium copper; 55-Silicone sponge and Monel;

60-Neoprene sponge and tin plated copper clad steel;

61-Silicone sponge and tin plated copper clad steel.

**Not available in Neoprene sponge.

The suffix “64” is BeCu with silicone elastomer tubing.

For other materials, replace the suffix “64” as follows:

56-Silicone elastomer tubing with Monel; 65-Silicone

elastomer tubing with tin plated copper clad steel.

The suffix “50” is BeCu neoprene sponge. For other materials, replace the suffix “50” as follows: 54-Neoprene

sponge and Monel; 52-Silicone sponge and beryllium copper; 55-Silicone sponge and Monel; 60- Neoprene sponge

and tin plated copper clad steel; 61-Silicone sponge and tin plated copper clad steel.

All dimensions shown are in inches (millimeters) unless otherwise specified.

* For part number ordering information on pressure-sensitive adhesive tape see page 1.4.

SIZE VS. TOLERANCE: RECTANGULAR WITH SPONGE ELASTOMER

Elastomer

Width

Total Width

SIZE VS. TOLERANCE: ROUND WITH SPONGE AND SILICONE

SIZE VS. TOLERANCE: SINGLE FIN WITH SPONGE ELASTOMER

RECTANGULAR WITH SPONGE ELASTOMER

ROUND WITH SPONGE ELASTOMER

ROUND WITH SILICONE

ELASTOMER TUBING

SINGLE FIN WITH SPONGE ELASTOMER

Laird Technologies Tubing Overall Total Height

Part No.

Diameter (O.D.) Width Over Wire

8415-0101-64 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

)1,91( 057.046-2010-5148

8415-0103-64 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

)1,91( 057.046-4010-5148

8415-0105-64 0.250 (6,4) 0.750 (19,1) 0.285 (7,2)

)4.52( 000.146-6010-5148

8415-0108-64 0.312 (7,9) 1.000 (25,4) 0.348 (8,8)

8415-0110-64 0.375 (9,5) 1.120 (28,5) 0.410 (10,4)

8415-0112-64 0.500 (12,7) 1.250 (31,8) 0.535 (13,6)

Laird Technologies Tubing Overall Total Height

Part No.

Diameter (O.D.) Width Over Wire

8414-0101-64 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

)1,91( 057.046-2010-4148

8414-0103-64 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

)1,91( 057.046-4010-4148

8414-0105-64 0.250 (6,6) 0.750 (19,1) 0.285 (7,2)

)4,52( 000.146-6010-4148

8414-0107-64 0.312 (7,9) 0.625 (15,9) 0.348 (8,8)

)4,52( 000.146-8010-4148

8414-0109-64 0.375 (9,5) 0.750 (19,1) 0.410 (10,4)

)5,82( 021.146-01

10-4148

8414-0111-64 0.500 (12,7) 1.000 (25,4) 0.535 (13,6)

)8,13( 052.146-2110-4148

Laird Technologies Elastomer Overall Total

Part No.

Diameter Width Height

8412-0101-50 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

8412-0102-50 0.125 (3,2) 0.750 (19,1) 0.160 (4,1)

8412-0103-50 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

8412-0104-50 0.188 (4,8) 0.750 (19,1) 0.225 (5,7)

8412-0105-50 0.250 (6,4) 1.000 (25,4) 0.285 (7,2)

8412-0107-50 0.500 (12,7) 1.312 (33,3) 0.535 (13,6)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/- 0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (±1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/- 0.060 (+2,3/-1,5)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/- 0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (±1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/- 0.060 (+2,3/-1,5)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/- 0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (±1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/- 0.060 (+2,3/-1,5)

All dimensions shown are in inches (millimeters) unless otherwise specified.

Single Fin with Silicone Elastomer Tubing

Total

Height

Including

Knitted

Wire

Overall

Width

Including

Knitted

Wire

Elastomer Dia.

For Size vs. Tolerance charts, dimensions

measured under 4 oz. load (11,3 gms) with

0.750 dia. (19,1 mm) anvil.

The suffix “64” is BeCu with silicone elastomer tubing. For other materials, replace the suffix “64” as follows:

-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.

Double Fin with Silicone Elastomer Tubing

For Size vs. Tolerance charts, dimensions measured under 4

oz. load (11,3 gms) with 0.750 dia. (19,1 mm) anvil.

The suffix “64” is BeCu with silicone elastomer tubing. For other materials, replace the suffix “64” as follows:

56-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.

Double Fin with Sponge Elastomer

The suffix “50” is BeCu neoprene sponge. For other materials, replace the suffix “50” as follows: 54-Neoprene

sponge and Monel; 52-Silicone sponge and beryllium copper; 55-Silicone sponge and Monel; 60- Neoprene sponge

and tin plated copper clad steel;

-Silicone sponge and tin plated copper clad steel.

For Size vs. Tolerance charts, dimensions measured under 4

oz. load (11,3 gms) with 0.750 dia. (19,1 mm) anvil.

SIZE VS. TOLERANCE: DOUBLE FIN WITH SPONGE ELASTOMER

SIZE VS. TOLERANCE: SINGLE FIN WITH SILICONE ELASTOMER TUBING

SIZE VS. TOLERANCE: DOUBLE FIN WITH SILICONE ELASTOMER TUBING

DOUBLE FIN WITH SPONGE ELASTOMER

SINGLE FIN WITH SILICONE ELASTOMER TUBING

DOUBLE FIN WITH SILICONE ELASTOMER TUBING

Laird Technologies Tubing Overall Total Height

Part No.

Diameter (O.D.) Width Over Wire

8415-0101-64 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

)1,91( 057.046-2010-5148

8415-0103-64 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

)1,91( 057.046-4010-5148

8415-0105-64 0.250 (6,4) 0.750 (19,1) 0.285 (7,2)

)4.52( 000.146-6010-5148

8415-0108-64 0.312 (7,9) 1.000 (25,4) 0.348 (8,8)

8415-0110-64 0.375 (9,5) 1.120 (28,5) 0.410 (10,4)

8415-0112-64 0.500 (12,7) 1.250 (31,8) 0.535 (13,6)

Laird Technologies Tubing Overall Total Height

Part No.

Diameter (O.D.) Width Over Wire

8414-0101-64 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

)1,91( 057.046-2010-4148

8414-0103-64 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

)1,91( 057.046-4010-4148

8414-0105-64 0.250 (6,6) 0.750 (19,1) 0.285 (7,2)

)4,52( 000.146-6010-4148

8414-0107-64 0.312 (7,9) 0.625 (15,9) 0.348 (8,8)

)4,52( 000.146-8010-4148

8414-0109-64 0.375 (9,5) 0.750 (19,1) 0.410 (10,4)

)5,82( 021.146-01

10-4148

8414-0111-64 0.500 (12,7) 1.000 (25,4) 0.535 (13,6)

)8,13( 052.146-2110-4148

Laird Technologies Elastomer Overall Total

Part No.

Diameter Width Height

8412-0101-50 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

8412-0102-50 0.125 (3,2) 0.750 (19,1) 0.160 (4,1)

8412-0103-50 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

8412-0104-50 0.188 (4,8) 0.750 (19,1) 0.225 (5,7)

8412-0105-50 0.250 (6,4) 1.000 (25,4) 0.285 (7,2)

8412-0107-50 0.500 (12,7) 1.312 (33,3) 0.535 (13,6)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/- 0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (±1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/- 0.060 (+2,3/-1,5)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/- 0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (±1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/- 0.060 (+2,3/-1,5)

Tolerance

thgieHhtdiWegnaR eziS

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8) + 0.060/- 0.030 (+1,5/-0,8)

0.390 to 0.050 (9,9 to 12,7) + 0.040/- 0.030 (+1,0/-0,8)

0.060 (±1,5)

0.510 to 1.000 (13,0 to 25,4) + 0.062/- 0.040 (+1,6/-1,0) + 0.090/- 0.060 (+2,3/-1,5)

All dimensions shown are in inches (millimeters) unless otherwise specified.

Single Fin with Silicone Elastomer Tubing

Total

Height

Including

Knitted

Wire

Overall

Width

Including

Knitted

Wire

Elastomer Dia.

For Size vs. Tolerance charts, dimensions

measured under 4 oz. load (11,3 gms) with

0.750 dia. (19,1 mm) anvil.

The suffix “64” is BeCu with silicone elastomer tubing. For other materials, replace the suffix “64” as follows:

-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.

Double Fin with Silicone Elastomer Tubing

For Size vs. Tolerance charts, dimensions measured under 4

oz. load (11,3 gms) with 0.750 dia. (19,1 mm) anvil.

The suffix “64” is BeCu with silicone elastomer tubing. For other materials, replace the suffix “64” as follows:

56-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.

Double Fin with Sponge Elastomer

The suffix “50” is BeCu neoprene sponge. For other materials, replace the suffix “50” as follows: 54-Neoprene

sponge and Monel; 52-Silicone sponge and beryllium copper; 55-Silicone sponge and Monel; 60- Neoprene sponge

and tin plated copper clad steel;

-Silicone sponge and tin plated copper clad steel.

For Size vs. Tolerance charts, dimensions measured under 4

oz. load (11,3 gms) with 0.750 dia. (19,1 mm) anvil.

SIZE VS. TOLERANCE: DOUBLE FIN WITH SPONGE ELASTOMER

SIZE VS. TOLERANCE: SINGLE FIN WITH SILICONE ELASTOMER TUBING

SIZE VS. TOLERANCE: DOUBLE FIN WITH SILICONE ELASTOMER TUBING

DOUBLE FIN WITH SPONGE ELASTOMER

SINGLE FIN WITH SILICONE ELASTOMER TUBING

DOUBLE FIN WITH SILICONE ELASTOMER TUBING

noitacificepSnoitpircseD

791 B MTSAreppoC muillyreBepyT eriW

Monel

QQ N 281 Class A

025 B MTSAleetS dalC reppoC detalP niT

Elastomer Type Neoprene Sponge MIL-R-6130 Type II, Grade A (Closed Cell) Conditioned

Medium; Temp. Range -24°F to 212°F (-31,1°C to 100°C)

;)lleC desolC( 5913 SMAegnopS enociliS

Temp. Range -103°F to 400°F (-75°C to 204°C)

Silicone Solid ZZ-R-765, Class 2, Grade 50;

Temp. Range -80°F to 500°F (-62,2°C to 260°C)

MATERIAL SPECIFICATIONS

Laird Technologies Elastomer Overall Total

Part No.

Diameter Width Height

8403-0101-50 0.125 (3,2) 0.500 (12,7) 0.160 (4,1)

8403-0102-50 0.125 (3,2) 0.750 (19,1) 0.160 (4,1)

8403-0103-50 0.188 (4,8) 0.625 (15,9) 0.225 (5,7)

8403-0104-50 0.188 (4,8) 0.750 (19,1) 0.225 (5,7)

8403-0105-50 0.250 (6,4) 0.750 (19,1) 0.285 (7,2)

8403-0106-50 0.250 (6,4) 1.000 (25,4) 0.285 (7,2)

8403-0107-50 0.500 (12,7) 1.000 (25,4) 0.535 (13,6)

Tolerance

.D.OegnaR eziS

To 0.120 (3,1)

0.020 (

0,5)

0.130 to 0.380 (3,3 to 9,7)

0.030 (

0,8)

)8,0-/0,1+( 030.0-/040.0 +)7,21 ot 9,9( 050.0 ot 093.0

)0,1-/6,1+( 040.0-/260.0 +)4,52 ot 0,31( 000.1 ot 015.0

Laird Technologies Tubing Diameter

Tubing Part No. Diameter (O.D.) Over Wire

8413-0101-64 0.125 (3,2) 0.160 (4,1)

8413-0102-64 0.188 (4,8) 0.225 (5,7)

8413-0103-64 0.250 (6,4) 0.285 (7,2)

8413-0104-64 0.312 (7,9) 0.348 (8,8)

8413-0114-64 0.375 (9,5) 0.383 (9,7)

8413-0105-64 0.375 (9,5) 0.410 (10,4)

8413-0106-64 0.500 (12,7) 0.535 (13,6)

Laird Technologies Elastomer Total Diameter

Part No. Diameter Over Wire

8410-0101-50** 0.062 (1,6) 0.098 (2,5)

8410-0102-50 0.125 (3,2) 0.160 (4,1)

8410-0103-50 0.188 (4,8) 0.225 (5,7)

8410-0104-50 0.250 (6,4) 0.285 (7,2)

8410-0105-50 0.312 (7,9) 0.348 (8,8)

8410-0106-50 0.375 (9,5) 0.410 (10,4)

8410-0107-50 0.500 (12,7) 0.535 (13,6)

Laird Technologies Elastomer Elastomer Total Total

Part No.

Width Height Width Height

8409-0101-50 0.125 (3,2) 0.125 (3,2) 0.160 (4,1) 0.160 (4,1)

8409-0102-50 0.188 (4,8) 0.125 (3,2) 0.225 (5,7) 0.160 (4,1)

8409-0104-5

0 0.188 (4,8) 0.188 (4,8) 0.225 (5,7) 0.225 (5,7)