Datasheet

ManualsBrandsLaird ManualsFiltersEcE Extrusion Strip 6.4x6.4mm

www.lairdtech.com

EMI ESSENTIALSEMI ESSENTIALS

UNIVERSAL MOUNTING

A stainless steel mounting track is available for use with our full line of gasketing materials. Its unique design offers a secure mounting option versatile

enough for use with ngerstock, ElectroNit

mesh, ElectroSeal elastomers, UltraSoft

Knit and fabric-over-foam products.

PART NUMBER WIDTH

0095-X996-00 0.310 (7.874)

0095-X997-00 0.430 (10.922)

0095-X998-00 0.600 (15.240)

MATERIAL THICKNESS

A = 0.030 (0.762)

B = 0.045 (1.143)

C = 0.060 (1.524)

D = 0.090 (2.286)

E = 0.150 (3.810)

To identify proper mounting track, select width and

corresponding part number from the above chart.

Replace the “X” with required material thickness.

Laird shielding devices may be mounted quickly and easily using any of several different

methods. Each installation method is described in the text that follows. However, if you should

run into a unique situation not resolved by any of these methods, give us a call. More than

likely we can provide the exact answer you need.

RIVET MOUNT

Riveting produces a tight, long-lasting installation. Either plastic or metal rivets may be used.

SLOT MOUNT

Slot mounted parts are easily installed using slots where bi-directional movement is required.

Simply install part into one slot and snap it into the second slot or over the edge of the frame.

ADHESIVE MOUNTING

Sticky Fingers

is an instant, pressure-sensitive adhesive bonding system, ideal for all-purpose

contact strips for metal cabinets and electronic enclosures, and is unaffected by temperatures

from -67 to +250°F (-55 to +121°C).

Simply follow these four easy steps:

1. Remove all grease and oily residue with solvent. Smooth the mounting surface with emery

cloth.

2. Peel off protective paper backing.

3. Place gasket in correct position. (See mounting methods diagrams A through E.) Press rmly

to ensure a good adhesive bond. Avoid repositioning, which might impair the effectiveness of

the adhesive or may bend or kink the strip.

NOTE: On items where ngers cover the solid portion of the gasket, pressure may be applied

by inserting a mandrel in the strip and pressing down. For contact strips with Magnel

insert,

simply press down on the ngers.

X =

MATERIAL

THICKNESS

0.145

(3.683)

0.699

(17.755)

14.898

(378.409)

1.500

(38.100)

0.356

(9.042)

0.205

(5.207)

0.018

(0.457)

0.205

(5.207)

DETAIL “A”

SEE DETAIL “A”

X =

MATERIAL

THICKNESS

0.145

(3.683)

0.699

(17.755)

14.898

(378.409)

1.500

(38.100)

0.356

(9.042)

0.205

(5.207)

0.018

(0.457)

0.205

(5.207)

DETAIL “A”

SEE DETAIL “A”

X =

MATERIAL

THICKNESS

0.145

(3.683)

0.699

(17.755)

14.898

(378.409)

1.500

(38.100)

0.356

(9.042)

0.205

(5.207)

0.018

(0.457)

0.205

(5.207)

DETAIL “A”

SEE DETAIL “A”

X =

MATERIAL

THICKNESS

0.145

(3.683)

0.699

(17.755)

14.898

(378.409)

1.500

(38.100)

0.356

(9.042)

0.205

(5.207)

0.018

(0.457)

0.205

(5.207)

DETAIL “A”

SEE DETAIL “A”

Universal Mount

Rivet Mount

Sticky Fingers

Slot Mount

Clip-On Mounting Tape Track Mount

X =

MATERIAL

THICKNESS

0.145

(3.683)

0.699

(17.755)

14.898

(378.409)

1.500

(38.100)

0.356

(9.042)

0.205

(5.207)

0.018

(0.457)

0.205

(5.207)

DETAIL “A”

SEE DETAIL “A”

^ Shielding gaskets may be mounted for either

wiping or compression closing applications.

Proper positioning of the shielding gasket must

take into consideration the closing design and

the conguration of the mounting surface.

4. Allow 24 hours minimum curing time.

Standard parts are supplied with nonconductive tape. For rough surface

applications, such as ame-sprayed surfaces, 0.010 in. (0.254 mm) thick

nonconductive tape is recommended. Optional conductive tape is also available.

Contact a sales department representative for additional ordering information.

CLIP-ON MOUNTING

Clip-on gaskets hold rmly in place due to their own spring characteristics.

Simply push the strips onto the edge or ange of the door or enclosure.

Also available are clip-on gaskets with either “T” or “D” lances.

TAPE TRACK MOUNTING

Stainless Steel mounting track with PSA (pressure sensitive adhesive) is available

on the Symmetrical Slotted Series and Slot Mount Series.

WELDING

Welded mounting requires simple, traditional welding techniques.

SOLDERING

Solder mounting requires normal low temperature soldering techniques,

including cleaning and uxing of parts with common copper ux materials.

FINGERSTOCK

MOUNTING METHODS

• In the above example, Laird part number 0097-0520-02 is a

97-520 RFI/EMI shielding gasket with a bright nish

• When ordering UltraSoft

items, the stock item prex will

be 0098 or 0078. The above example in UltraSoft would be

0098-0520-02.

• When ordering coil, the prex 0C should precede the stock

item number; for example: 0C97, 0C98, 0C77 or 0C78

• When ordering stainless steel items, the stock item prex will

be 0095

• Standard plating nish is 0.0001 in. (0.0025 mm) min. [gold

0.00005 in. (0.0013 mm) min.] but can be varied to meet

your custom needs

• Modications to standard parts are specied by an X

(following nish I.D.) for quoting only. Upon ordering,

a specic part number will be assigned.

• For tape options, see Adhesive Mounting — Sticky Fingers

on page 16

• Use the catalog number for the unique part number and refer

to the following chart for nish I.D.

FINGERSTOCK

ORDERING INFORMATION

Part Number Format

Plating Finishes

Finish Designation Finishes for Fingerstock Products

(BeCu and RCC)

Laird

Specications Specication Details*

Unplated Bright Finish 02 Laird Designation Unplated, Bright or Ultrasoft surface

Solderable Unplated 21 Laird Designation Solderable bright nish

Gold Gold 03 ASTM B 488 / SAE AMS 2422 Type I & II, grade C, 1.27 - 2.5 µm thick

Gold/Nickel Underplate 10 ASTM B 488 / SAE AMS 2403 Type I & II, grade C, 1.27 - 2.5 µm thick

Silver Silver (matte) 04 ASTM B 700 / QQ-S-305 Type II, grade A, 2.5 - 7.6 µm thick

Cadmium** Cadmium + Yellow Chromate 05 ASTM B 766 / AMS QQ P 416 Type II, class 5, min 5 µm thick

Cadmium + Clear Chromate 06 ASTM B 766 / AMS QQ P 416 Type III, class 5, min 5 µm thick

Tin Lead** Tin Lead [60/40] Solder 07 ASTM B 579 / SAE AMS P 81728 7.6 - 12.7 µm thick

Nickel Dull Nickel 09 ASTM B 689 / SAE AMS 2403 (QQ-N-290) 2.5 - 7.6 µm thick*

Bright Nickel 19 ASTM B 689 / SAE AMS 2403 (QQ-N-290) 2.5 - 7.6 µm thick*

Sulfamate Nickel 24 ASTM B 689 / SAE AMS 2424 2.5 - 7.6 µm thick (1.27 - 2.5 µm underplate)

Electroless Nickel Electroless Nickel 18 ASTM B 733 / SAE AMS C 26074 2.5 - 7.6 µm thick

Tin Satin / Matte Tin 08 ASTM B 545 / MIL-T-10727C Type I, 2.5 - 7.6 µm thick

Bright Tin 17 ASTM B 545 / MIL-T-10727C Type I, 2.5 - 7.6 µm thick

Zinc*** Zinc + Yellow Chromate 16 SAE AMS 2402 / ASTM B 633 Type II, 2.5 - 7.6 µm thick

Zinc + Clear Chromate 15 SAE AMS 2402 / ASTM B 633 Type III, 2.5 - 7.6 µm thick

Notes:

- Laird standard plating codes are dened according to the above specications. Any non-standard requirements (different classes or types within a specication)

must be clearly identied on the production prints.

- The plating thickness indicates the thickness measured on the primary out-surface of ngerstock products.

* Class 1, Grade G in QQ-N-290

** Outsourced process

*** Laird provides RoHS compliant Trivalent Chromate

Example:

Stock Item Unique Part No. Finish I.D.

0 0 9 7 — 0 5 2 0 — 0 2