User's Manual

European Union (ETSI) Regulatory Information:
The ARG411M01 Module has been certified for use in European Union countries. If these modules are
incorporated into a product, the manufacturer must ensure compliance of the final product to be European
harmonized EMC and low voltage/safety standards. A declaration of Conformity must be issued for each of
these standards and kept on file as described in Annex II of the R&TTE Directive. Furthermore, the
manufacturer must maintain a copy of the modules’ documentation and ensure the final product does not
exceed the specified power ratings, antenna specifications, and/or installation requirements as specified in the
user manual. If any of these specifications are exceeded in the final product, a submission must be made to a
notified body for compliance testing to all required standards.
IMPORTANT: The “CE” marking must be affixed to a visible location on the OEM product. The CE mark shall
consist of the initials “CE” taking the following form:
The CE marking must have a height of at least 5mm except where this is not possible on account of the nature
of the apparatus. The CE marking must be affixed visibly, legibly, and indelibly.
FCC ID: 2ATN7-ARG411M01
IC: 25152-ARG411M01
16 Ribocon Way, Progress Park, Luton, United Kingdom LU4 9UR ● P: [phone] ● www.argonelectronics.com