Datasheet

www.lairdtech.com16
STANDARD DESIGN SHIELDS AND CONTACTS
EZ PEEL
TM
STANDARD SHIELDS
For Quick and Easy Access to Board Level Components
Laird Technologies offers four standard sizes of EZ Peel removable cover
board level shields. These patented shields have a solid top, scored to allow
peel-off when access to board level components within the shield is required.
The peel-off feature prevents damage to the board and components by
eliminating the need for labor intensive de-soldering, which often results in
increased scrap. Peeling off the cover is accomplished by using a small starter
hole for simple removal. This hand operation requires minimal force using a
hook scriber or tweezers.
After repair, replacement or adjustment of internal components, the shield
can be resealed using a replacement cover. Laird Technologies offers two
replacement cover options: a snap-in cover and a dish cover.
The snap-in cover utilizes a lance and hole design. The replacement cover
snaps into place and locks into a lance feature on the frame of the original
shield.
The other option is a dish cover that gets soldered into place on the board.
The dish shape allows for self-location of the cover for soldering.
Standard EZ Peel board level shields can be packaged in tape and reel
formats for easy SMT installation using conventional pick-and-place
equipment. The four standard sizes are also available without the EZ Peel
(scored) feature.
• Easy removal of scored cover area
• Only 1.5 lbs. force required for cover removal
• Simple replacement technique for cover
• Used on surface mount or through-hole applications
• Shield retains all physical properties after PCMCIA/ JEIDA testing for shock,
bending, torque, drop and vibration
• CRS 1008/1010 (tin plated) for solderability
• RoHS compliant
Original EZ Peel Board Level Shield
Snap-in Cover Application
^
After removal of scored section and
application of snap-in cover
Dish Cover Application
^
After removal of scored section and
application of dish cover
TABLE 1
All dimensions shown are in (inches) millimeters unless otherwise specified.
EZ PEEL SHIELD
PART NUMBER
REPLACEMENT LID OPTIONS
SNAP-IN LID NUMBER DISH LID NUMBER
97-2002 97-2007 97-2014
97-2003 97-2006 97-2013
97-2004 Not Available 97-2016
97-2005 97-2008 97-2015