Datasheet

STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com4
PIN STYLE 3.
PIN STYLE 4.
FIGURE 3.
Phantom
lines indicate
optional
L-shaped
configuration
All dimensions shown are in inches (millimeters) unless otherwise specified.
PIN STYLE 2.
FIGURE 2.
.130 to 1.000
(3,3 to 25,4)
Under Cover
Height Range
.130 to 1.000
(3,3 to 25,4)
Under Cover
Height Range
Any pitch (P) with minimum
of .200 (5,08)
.130 to 1.000
(3,3 to 25,4)
Under Cover
Height Range
.130 to 1.000
(3,3 to 25,4)
Under Cover
Height Range
Surface Mount Tab Pitch Selection Placement and Corner Locking Feature
Through Hole
Cover Detail
Standard cover material thickness 0.010" (0,25 mm) tin plated
phosphor bronze, in coated steel or stainless steel
Type on
random
locations
Flush Surface Mount