Thermoelectric modules
There are 120 reasons to choose a standard thermoelectric module from Supercool. But one is enough We Scandinavians don’t tend to sing our own praises. So refrigerator running on our TE-modules will be about 3-4°C when we say we supply the best thermoelectric modules on cooler than if you use the vast majority of competing prod- the market, it’s no idle boast. ucts. Thanks to unrivaled material characteristics, our modules deliver truly outstanding performance (max. ∆T up to 75°C).
range includes modules of every conceivable size – from Temperature controllers to ensure top performance the tiniest miniature modules to high-power density TEMs Specially designed for thermoelectric applications, our tem- delivering cooling power up to 340 W. In addition, silicon and perature controllers guarantee not only reliable performance epoxy sealing, metallization as well as other options are all but also the temperature stability of your system. For more available on request.
Examples of custom-designed TE modules: a gold metallized micro-TEM, a kit of 3 sealed TEMs with wire harness, and a 5-stage module optimized for best ∆T. This 2-stage TE module, epoxy bonded to a machined heat sink, cools a CCD in a vacuum.
Custom design – finding a solution quickly Although we provide more than 120 standard modules, we’re Modules alone won’t do the job fully aware that a standard product will not always meet We provide not only modules, but also wire harnesses, pack- your needs. That’s why we pride ourselves on being able to aging such as epoxy bonding to heat sinks and much more. customize solutions quickly and cost-efficiently. All you have To make the most of the market’s finest TEMs, be sure to to do is ask.
HIGH PERFORMANCE SERIES Standard modules Supercool’s thermoelectric modules for industrial and commercial applications deliver the market’s best cooling performance. By using one or more TEMs, you can design a cooling system with effects ranging from just a few Watts all the way up to several hundred Watts. With max. voltage from 0.9 V up to 30 V DC and an array of pellet geometries, there’s every chance of finding just the right module for your application.
HIGH PERFORMANCE SERIES Miniature modules Standard internal solder temperature is 138°C (Th max 80°C). This range has been specially developed for low-effect applications where space is limited, such as optical components, sensors and lasers typically found in the opto-electronics and telecom industries. Our superior TE-material makes it possible to achieve ∆T up to 74°C (at Thot = 25°C). Standard sizes range from 2.5 x 2.5 mm up to 13.2 x 13.2 mm.
HIGH PERFORMANCE SERIES Center hole modules Center hole modules are used when light, wires or other hardware need to be transferred through the module. We only stock a limited number of modules of this type. Let us know about the challenges of your application, and we’ll make sure you get just the right module. In principle, all modules can be supplied with a center hole. Operating temperature is max. 80°C. Product No.
HIGH TEMPERATURE & POWER MODULES High temperature modules Supercool’s high temperature modules deliver not only long-term operation up to 150°C, but also outstanding cooling performance (Max. ∆T = 73°C at Thot = 25°C). Although we boast a modest standard range, we can, in principle, supply all modules as high temperature modules should your application call for high volumes. Product No. I max (A) High temperature modules PF-031-10-13 3.9 PF-071-10-13 3.9 PF-071-14-15 6 PF-127-10-13 3.9 PF-127-10-20 2.
MEDIUM PERFORMANCE MODULES TECHNICAL INFORMATION Thermoelectrics and how it works Heat out Cooling Work in Medium performance modules Kristall, our new range of medium performance thermoelectric modules, is specially designed for high volume applications. A novel manufacturing technique allows us to offer dependable performance – at an attractive price. Max. ∆T of up to 72°C at Th = 25 °C.
TECHNICAL INFORMATION Installation Operation • Recommended mounting methods are clamping using thermal • Storage and operation in a condensing environment is only recom- grease, bonding with thermal epoxy, or soldering with metallized mended if you use sealed modules. ceramics (option). • Generally TE modules are operated at 40-80% of Umax. • TE modules should not be subjected to significant shear forces.
Supercool on the Internet To find out more about Supercool, our products and solutions, visit us at www.supercool.com. We’ve also posted a complete list of representatives on our The widest range of standard solutions Robust, efficient and compact, our thermoelectric solutions We provide everything you need to get your thermoelectric haven been put to the test in scores of applications.
