Datasheet
This range has been specially developed for low-effect app-
lications where space is limited, such as optical components,
sensors and lasers typically found in the opto-electronics and
telecom industries. Our superior TE-material makes it pos-
sible to achieve ∆T up to 74°C (at T
hot
= 25°C). Standard
sizes range from 2.5 x 2.5 mm up to 13.2 x 13.2 mm.
Standard internal solder temperature is 138°C (T
h max
80°C).
Optionally we can offer 183°C and 232°C internal solder
– both with an operating temperature of up to 150°C. Gold
metallization and pretinning (95, 138 or 183°C) are other
options.
We also provide miniature TEMs on request.
7
Miniature modules
PE-008-03-09 0.5 1.0 0.3 71 1.82 2.5 3,5 2.5 2.05 50 0.25
1
PE-018-03-09 0.5 2.2 0.6 71 4.29 3.5 4,5 3.5 2.05 50 0.25
1
PE-032-03-09 0.5 3.9 1.1 71 7.62 5.0 6.0 5.0 2.05 50 0.25
1
PE-007-06-11 1.5 0.9 0.8 72 0.42 4.0 4.0 2.7 50 0.25
1
PE-017-06-11 1.5 2.1 2.0 72 1.12 6.0 6.0 2.7 50 0.25
1
PE-018-06-11 1.5 2.2 2.1 72 1.22 6.0 7.2 6.0 2.7 50 0.25
1
PE-023-06-11 1.5 2.8 2.6 72 1.53 8.2 6.0 1.95 50 0.25
1
PE-029-06-11 1.5 3.6 3.3 72 1.87 10.2 6.0 2.7 50 0.25
1
PE-031-06-11 1.5 3.8 3.6 72 2.03 8.0 8.0 2.7 50 0.25
1
PE-068-06-11 1.5 8.3 7.8 72 4.35 13.2 13.2 2.7 50 0.25
1
PE-007-05-15 0.8 0.9 0.4 74 0.88 4.0 4.0 3.0 50 0.07
2
PE-011-05-15 0.8 1.4 0.7 74 1.45 4.0 6.0 3.0 50 0.07
2
PE-017-05-15 0.8 2.1 1.1 74 2.15 6.0 6.0 3.0 50 0.07
2
PE-031-05-15 0.8 3.8 2.0 74 4.11 8.0 8.0 3.0 50 0.07
2
PE-065-05-15 0.8 8.1 4.2 74 8.2 11.0 12.0 3.0 100 0.07
2
PE-007-07-10 2.4 0.9 1.3 72 0.34 6.0 6.0 2.5 50 0.14
2
PE-011-07-10 2.4 1.4 1.9 72 0.53 6.0 8.0 2.5 50 0.14
2
PE-017-07-10 2.4 2.1 2.9 72 0.82 8.0 8.0 2.5 50 0.14
2
PE-031-07-10 2.4 3.8 5.3 72 1.49 10.0 10.0 2.5 50 0.14
2
PE-065-07-10 2.4 8.1 11.1 72 3.12 14.0 15.0 2.5 50 0.14
2
Product No. P
c
max
(W)
U
max
(V)
I
max
(A)
A / Ac B H L
S
mm/mm
2
(mm)∆T
max
(°C)
• R
AC
tolerance = ±10%
• Tolerance of I
max
, U
max
, Q
max
= ±5%
Miniature modules
Ah±0,2
Ac±0,2
B±0,2
Cold side
0,02 A
0,02
// 0,04 A
L±20
S
-Input +Input
H±0,2
1) Bare wire, Ni over Cu, diameter in mm
2) Teflon insulated wire. Cross section in mm
2
R
AC
(ohm)
Ah
HIGH PERFORMANCE SERIES