Owner's manual

Troubleshooting & Wiring Diagrams for DC Boat Lift Systems
Connecting
Mounting
1. Connect controller to battery
2. Connect controller to solar panel
NOTE: Order of connection is not important. System will automatically correct itself.
Expose Solar Panel to Light & Dark to confirm system is working correctly. Check that the
GREEN LED turns on when solar panel is exposed to sunlight.
PRE-CHECK #1: Connect Regulator to Solar panel to confirm Charging Status LED Turns
On (Battery is NOT yet connected)
PRE-CHECK #1: Connect Regulator to Battery to confirm Battery Status LED Turns On.
(Solar Panel NOT Connected)
NOTE: If both Pre-Checks are OK Regulator is functioning correctly unless the Battery
Status LED is constantly blinking slow-green: if this persist regulator is damaged.
1. Use necessary hardware to mount controller
2. Controller should be mounted near battery or inside battery box.
Solar Charge Regulator
MODEL: LL-REG-12v-3A-PB
For more information & wiring diagrams for installation on DC boat lift
systems please visit: http://lakelite.com/wirediagrams.html
Or download PDF wiring diagram: http://lakelite.com/wirediagrams.pdf
Lake Lite Inc.
105 W Simon St
Laotto, IN 46763
Phone: [phone]
Fax: [phone]
E-mail [e-mail]
www.lakelite.com