Supplementary Document

Lakeland Disposable and Chemical Clothing Performance and Selection
Quick Reference Guide
General
Protection
Dirt, Oil and Grease
l l l
H
l l l l l l
Hazardous Dry Particulates
l l
H
l l l l l l
Non-hazardous Liquids
l l l
H
l l l l l
Welding, Cutting and Grinding
H
l l
Aerosol Spray
Non-hazardous Liquids (Aerosol)
l l
H
l l l l l
Paint and Hazardous Liquids – Spray
l l
H
l l l l l l l l l l
Dry Particle - Aerosols
l l
H
l l l l l l l l
Chemical
Splash
Low Exposure, Low Risk Chemical Splash
l l l l l l
H
l
High Exposure / High Risk
l l l l
H
l
Hazmat
Hazmat, NFPA Certied
H
Hazmat, Maritime
H
l l
Hazmat, Non-Certied
l l l l
H
l
Flame
Resistance
Flammable Environments (Aerosol)
H
l l
Flammable Liquids
H
Chemical Flash Fire
l l l l
Critical
Environment /
Biohazard
Clean Rooms
l
H
Paint Booth
l
H
l l
Bloodborne Pathogens [4]
l l l l l
H
l l l l l
Waste Water Treatment
l l l l
H
l l l l l
Relative
Performance
[3]
Comfort 5 4 2 2 4 4
Barrier 1 2 5 5 2 2
Durability 1 4 4 3 3 4
ZoneGard® SafeGard® MicroMax® MicroMax® NS Pyrolon® Plus 2 [1] Pyrolon® XT [1] Pyrolon® CRFR [1] ChemMax® 1 Serged Seam ChemMax® 1 Bound Seam ChemMax® 1 Heat Sealed Seam ChemMax® 2 Bound Seam ChemMax® 2 Heat Sealed Seam ChemMax® 3 ChemMax® 4 Interceptor® [2]
Chart Key
[1] Pyrolon® family of products must be worn over thermally protective garments,
such as FR Cotton or FR meta aramids
[2] Interceptor® is available certied for NFPA 1991 and CE Type 1
[3] Relative Ratings: 1 is lowest, 5 highest, based on EN/ISO test results and relative
dierence between fabrics
[4] Lakeland recommends sealed seams for protection against infectious diseases
l = May meet requirements depending on degree of hazard
H = Best seller for application
Available Seams
Serged
Seam
• Joins two
pieces of
material
with a
thread that
interlocks.
• Economical stitching method for
general applications
• Generally not used for chemical pro-
tective clothing and commonly found
on disposable clothing
Heat
Sealed
Seam
• Sewn
and then
sealed
with a heat
activated tape
• Provides liquid proof seams, and is
especially useful for Level A and B
chemical protective clothing.
Sewn and
Bound Seam
• Joins two
pieces of ma-
terial with an
overlay of sim-
ilar material
• Chain stitched through all of the layers
for a clean nished edge
• Provides increased holdout of liquids
and dry particulates