Instruction Manual

www.TWISTIICLEAN.com
TWISTIICLEAN removes sand and organics as the water
passes through the filter element. Periodic cleaning is
necessary to optimize filter performance, reduce the
pressure loss
and prolong
the product life.
When the lter
element looks
like it is lled with
debris, it should be
cleaned.
Just a gentle
1/4 clockwise
TWIST of the
top handle begins
the patented
reverse ushing action. In just a few seconds, all debris
are backwashed off the filter element and flushed out the
bottom of the purge exit port. BE SURE TO REPLACE THE
SAFETY BOLT AND WING-NUT AFTER FLUSHING.
Using Your TWISTIICLEAN HF
Normal Mode
Flush Cleaning
Mode
Water Flow Direction
TWISTIICLEAN High Flow 2- inch
Exploded View and Spare Parts
T2C-200
Maintenance and Troubleshooting
If for any reason the lter element does not clean
completely during the normal Twist to Clean operation,
manual cleaning may be needed. In this case, shut off your
system and decompress your water line. Then remove the
bowl and clean the element with a soft brush, brushing and
running water across element.
Caution: If the lter bowl is to be removed, all water
ow must be shut off going to the lter.
Safety Notes:
Despite the ease of installation and operation of the LAKOS
TWIST
IICLEAN product, certain precautions should be taken.
1. Lubricate “O” rings with NSF approved silicon grease only -
Dow 111 is recommended.
2. Do not overtighten the threaded connections. Do not tighten
more than a 1/4 turn past nger tight. Hand tighten the bowl,
do not use tools.
3. Do not use wrenches on plastic lter parts. Use of tools on
lter will void warranty.
4. For threaded connections, use the sealant tape provided
with product.
5. Filter components that have “O” rings do not require thread
sealant.
6. This lter is designed for use with water only. Other
chemicals or components can damage the lter
components. Evaluate all chemicals for proper usage with
the lter.
7. Protect unit from freezing, as you would with any other
water supply lines.
8. Follow all local and state codes, laws, and regulations when
installing any lter.
Limited Warranty
The LAKOS TWISTIICLEAN is warranted to be free of material or workmanship
defects for at least one year from delivery date.
If a fault develops, notify us, giving a complete description of the alleged
malfunction. Include the model number(s), date of delivery and operating
conditions of subject product(s). We will subsequently review this information
and, at our option, supply you with either servicing data or shipping instruction and
returned materials authorization. Upon prepaid receipt of subject product(s) at
the instructed destination, we will then either repair or replace such product(s),
at our option, and if determined to be a warranted defect, we will perform any
products, damages or injuries resulting from misuse, neglect, normal expected
wear, chemically-caused corrosion, improper installation or operation contrary
to factory recommendation. Nor does it cover equipment that has been modifed,
tampered with or altered without authorization. No other extended liabilities are
stated or implied and this warranty in no event covers incidental or consequential
damages, injuries or costs resulting from any such defective product(s).
For proper
purging of your
TWIST
IICLEAN,
remove the
safety bolt and
wing-nut prior
to twisting the
handle.
FilterElementKit
FilterElementKitPlus
ScreenSupport
O-RingKit
Bowl&O-RingKit
131743(60Mesh)
131744(100Mesh)
131745(140Mesh)
131746(200Mesh)
133014
131741(standardthread)
131742(BSPthread)