Operation Manual

4
Alarm clock
In the app go to the Alarm settings. Set the day and time of the alarm.
At the set time the tness band will display this icon and vibrate.
Inactivity alert
In the app go to the Sedentary reminder settings. Here you can set the
time range and days of the week that you want the BFit to encourage
your activity. If you are inactive for a long time within this period the
band vibrates and this icon is displayed .
Phone locate
Navigate the menu of tness band, which is paired with the phone, to
the icon . Touch and hold the display until the band vibrates. The
phone will now begin to ring or vibrate (if it is on vibrate).
Smartphone camera remote control
In the app navigate to the camera controls in the section Camera. The
icon is then displayed on the paired tness band. To take a photo,
press and hold the BFit display.
Display incoming call and message notications
In the app navigate to Message push settings. Select which no-
tications to display on the tness band. If a notication does not
appear on the Bt screen, despite being paired with the phone and
with the notication function enabled in the app, disconnect and
reconnect the band to the smartphone via Bluetooth and turn the
notications o and on again in the app.
Water and dust resistant
The tness band is resistant to the ingress of water and foreign
objects according to the IP67 rating. This means that it is resistant to
water when immersed for 30 minutes up to a depth of 1m and to the
penetration of foreign matter including dust.
Technical specications
Bluetooth v 4.0
Display 0.91“ OLED
Weight of body 9 g
Weight of whole
device
26 g
Body dimensions 46 mm x 18.7 mm x 7.9 mm
Charging USB 5 V / 0.5 A
Battery 3.7V 75mAh Li-Ion
Water resistant in accordance with IP67, up to 1 m for 30 minutes