User manual
8
LAMAX DRIVE C4 Car Camera Basic Settings
1) Formatting
It is necessary to format the card in the camera when inserting the me-
mory card for the rst time. This information will be displayed on the
homescreen when you turn the camera on. If the card being used was
previously formatted in a PC, format it in the camera before using it
again.
2) Language
Sets the menu language.
3) Key Sound
Enables or disables the key tones.
4) Auto Power O
Allows you to set auto power o after 1, 3 or 5 minutes.
5) LCD O
Sets the display to automatically turn o when idle for 1, 3 or 5 minutes.
6) Delayed Power O
Allows you to set a delay time between the power being disconnected
and the camera shutting o. This can be set to 10, 20 or 30 seconds or
completely disabled.
7) G-sensor
The G-sensor enables the camera to record impacts, such as trac ac-
cidents. Once the camera senses the impact, the current recording is
immediately locked so that it cannot be recorded over. The sensor can
be set at several dierent sensitivities (high, low, medium) or switched o
completely.
8) Grid Frequency
Allows you to select the frequency in accordance with the grid frequency
(on the European continent the frequency is 50 Hz and the Americas and
parts of Asia it is 60 Hz).
9) Date Format
Allows you to set the date format – day/month/year, year/month/day or
month/day/year.
10) Date
Sets the date.
11) Time
Sets the time.
12) Factory Settings
Restores the camera’s original factory settings.